Tactical Vertical Grip RIS (Black) - Delta Armory

The softair rifle from Delta Armory with spring quick change system in caliber 6 mm BB with max.0.5 joules and continuous fire mode belongs to the Alpha series (The Alpha series is the full metal series) and is the Delta Armory entry-level series. In this model, the entire housing (receiver) was manufactured using the aluminum printing process. On the aluminum handguard and the body is a Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all kinds of aiming aids whether scope or red dot sight can be mounted. Delta Armory has built in a horizontally and vertically adjustable rear sight and a height-adjustable front sight from the factory. The rear sight and front sight are flip-up. The outer barrel has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for house fighting. The fire selector lever is located on one side and locks perfectly on the various settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a mount for risers on the left and right sides. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the charging handle is easy to operate. The Delta Armory comes with a midcap magazine. The stock of the rifle has room for an 11.1 volt Lipo triple-stick battery. Delta Armory's installed gearbox is a V2 metal gearbox with 8mm bearings. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is remarkable.   Here are a few specs; - SHS piston with full metal teeth - Spring-loaded QRS gen.quick release system without disassembly of the rifle - Ball bearing springguide - QRS motor quick change - Rotery hop-up chamber - Reinforced Gears for 120-130 spring - 6.03mm inner barrel - High quality 8mm ball bearings - Long lasting gears   We recommend using high quality G&G BB's starting at 0.25g. We recommend having a Gate Aster or Gate Titan installed as the gun has a classic trigger unit and this can lead to gearjams. We do not recommend using NIMH batteries. We recommend LiPos. A battery is not included in the delivery. A charger is not included in the delivery.

Zweiteiliger Li-Po Akku. Der Akku hat die Stärke 7,4V 1300 mAh. Extrem universell einsetzbarer Lipo mit sehr guter Performance. Er ist bestens geeignet um 9.6V NiMH Universal Type Akkus zu ersetzen und spart gleichzeitig Platz und Gewicht. Dadurch wird der Akku auch überall dort äusserst interessant, wo sehr wenig Platz vorhanden ist.UNBEDINGT beachten: Besonders bei LiPo Akkus ist es zwingend notwendig, nur geeignete LiPo Ladegeräte mit eingebautem Balancer zu werden. Der max. Ladestrom darf höchstens 1C (einfache Kapazität) betragen, d.h. bei einer 1300mAh Zelle max. 1300mA. Lithium Polymer Akkus sind elektrisch und thermisch empfindlich: Überladen, Tiefentladen, zu hohe Ströme, Betrieb bei zu hohen (größer 60 °C) oder zu niedrigen Temperaturen(kleiner 0 °C) und Lagern in entladenem Zustand schädigen oder zerstören die Zellen in den meisten Fällen.Hier sind nur die jeweiligen ASG Ladegeräte freigegeben. Bitte beachten Sie auch in jedem Fall die dem Akku beiliegenden Warnhinweise. Nur verwenden bei Waffen, die auch als LiPo ready angegeben sind.Dimensionen: 2 Zellen mit je 125 x 20 x 7 mmSpannung: 7.4 Volt (2 Zellen)Kapazität: 1'300 mAh / 20 CLadestrom (max.): 1.3 AEntladestrom (max.): 26.0 AWattstunde: 9.6 WhAnschluss: Mini TamiyaGewicht: 70 g

Das Rotpunktvisier des Herstellers Delta Armory kann auf eine 22 mm RIS-Schiene montiert werden. Die Höhe des Rotpunktes bei montiertem Rotpunktvisier beträgt ca. 6 cm. Die Länge des Visiers beträgt 95 mm. Das Paket beinhaltet ein Rotpunktvisier, Montage auf RIS-Schienen 22mm, Gummikappen und eine CR2032 Batterie.

Systemartikel, kann nicht einzeln bestellt werden! Klassische Abzugseinheit mit Metallkontakten OHNE Mosfet oder Mikroschalterfunkton

388 fps mit 0.20g BB's = ca. 1,40 Joule (+/- 0,10 differenz möglich)

The softair rifle from Delta Armory with spring quick change system in caliber 6 mm BB with 0.5 joules and FullAuto belongs to the Charlie series (The Charlie series is the high performance polymer series) and is the Delta Armory entry level series. On the high performance polymer handguard and the high performance polymer body there is a Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all kinds of aiming aids whether scope or red dot sight can be mounted. Delta Armory has built in a horizontally and vertically adjustable rear sight and a height-adjustable front sight from the factory. The rear sight and front sight are flip-up. The outer barrel has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for house fighting. The fire selector lever is located on one side and locks perfectly on the various settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a mount for risers on the left and right sides. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the charging handle is easy to operate. The Delta Armory comes with a midcap magazine. The stock of the rifle has room for an 7,4 volt Lipo double-stick battery. Delta Armory's installed gearbox is a V2 metal gearbox with 8mm bearings. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is remarkable.   Here are a few specs: - SHS piston with full metal teeth - Spring-loaded QRS gen.quick release system without disassembly of the rifle - Ball bearing springguide - QRS motor quick Change - Rotery hop-up chamber - Reinforced Gears for 120-130 spring - 6.03mm inner Barrel - High quality 8mm ball bearings - Long lasting gears We recommend using high quality G&G BB's starting at 0.20g. We recommend having a Gate Aster or Gate Titan installed as the gun has a classic trigger unit and this can lead to gearjams. We do not recommend using NIMH batteries. We recommend LiPos. A battery is not included in the delivery. A charger is not included in the delivery.