Magazine M4 Midcap in Black (120 BBs) G&G

The softair rifle from G&G in caliber 6 mm BB belongs to the CM (Combat Machine) series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the CM16 thus belongs to the middle class. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes here extremely high-quality materials with a very pleasant and realistic feel. Once in the hand, you would prefer not to put it down. The handguard with M-Lok or Keymod made of aluminum is CNC milled and absolutely accurately connected to the body. It has various plug positions and sits so tight, wobbles, crunches and creaks nothing. Here G&G has recognized the advantages of the system and improved compared to other manufacturers equal. Since G&G processes only high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod or M-Lock attachments that are available on the market fit on the handguard. On the aluminum handguard and the body is a long Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the Handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for house fighting. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a throttle release system mimicked on the outer barrel. The fire selector lever is located on the left side and engages perfectly on the various settings. For left hand shooters who want to have their fire selector lever on the right side as well, the GC series from G&G is just made for them. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The CM16 comes with a rubberized highcap magazine. The magazine holds about 300 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for an 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. The shaft can be adjusted 5 times and can be locked in any position. To prevent problems with the triggers, we recommend the installation of a Gate TITAN™. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8 mm bearings. With an adjustable hop-up chamber, the range and accuracy of this assault rifle is exceptional in its class. We recommend using high quality G&G BB's starting at 0.25g.   A battery is not included in the delivery. A charger is not included in the delivery.

The softair rifle from G&G in caliber 6 mm BB belongs to the CM (Combat Machine) series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes here extremely high-quality materials with a very pleasant and realistic feel. Once in the hand, you would prefer not to put it down. The handguard is made of reinforced high-performance polymer and is connected to the body with absolute precision. It fits tightly, does not wobble, crunch or creak. On the high-performance polymer body is a short Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. The factory barrel is made of metal and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. The fire selector lever is located on the left side and locks in perfectly on the various settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the charging handle to the rear. The CM16 comes with a high-cap magazine. The magazine holds about 300 BB's and is loaded by turning up the cocking wheel. The battery stows very easily in the stock. The stock can be adjusted 5 times and can be locked in any position. The G&G gearbox is the typical V2 G&G metal gearbox with 8 mm bearings. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the scope of delivery. A charger is not included in the scope of delivery.

The softair rifle from G&G in caliber 6 mm BB belongs to the CM (Combat Machine) series and is the G&G Armament entry-level series. However, there are massive differences to entry-level models from other manufacturers, because the CM16 belongs to the middle class. se. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes here extremely high-quality materials with a very pleasant and realistic feel. Once in the hand, you would prefer not to put it down. The handguard with M-Lok or Keymod made of aluminum is CNC milled and absolutely accurately connected to the body. It has various plug positions and sits so tight, wobbles, crunches and creaks nothing. Here G&G has recognized the advantages of the system and improved compared to other manufacturers equal. Since G&G processes only high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod or M-Lock attachments that are available on the market fit on the handguard. On the aluminum handguard and the body is a long Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the Handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for house fighting. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a throttle release system mimicked on the outer barrel. The fire selector lever is located on the left side and engages perfectly on the various settings. For left hand shooters who want to have their fire selector lever on the right side as well, the GC series from G&G is just made for them. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically shaped. The sling swivel above the grip has a mount for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right, or both sides, the Charging Handle is easy to operate. The CM16 comes with a rubberized highcap magazine. The magazine holds about 300 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. The shaft can be adjusted 5 times and can be locked in any position. To prevent problems with the triggers, we recommend the installation of a Gate TITAN™. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8 mm bearings. With an adjustable hop-up chamber, the range and accuracy of this assault rifle is exceptional in its class. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the scope of delivery. A charger is not included in the scope of delivery.  

The SGR 556 series with full metal body in the new design as -F- variant. The handguard has a RIS rail on the side as well as on the bottom for attaching other separately available accessories. A new feature of this rifle is the micro-switch trigger unit with Mosfet. Similar to an ASCU, you now have the advantages of a switch unit with microswitch. The microswitch trigger unit, which sits completely in the gearbox, is suitable for LiPo batteries. Only high-quality batteries specially developed for airsoft should be used here. High trigger speed is not the only advantage of the ETU. The SGR556 is the ideal softair for ambitious beginners. The materials as well as the workmanship are excellent as known from G&G. With the new trigger technology, G&G takes another step in the right direction, away from old shackles to modern airsoft models that guarantee high fire rates and durability.   A battery is not included in the scope of delivery. A charger is not included in the scope of delivery.

BEARS-TEC® ist unsere Premium Hausmarke und nur für die besten Produkte vorgesehen! Dieser Li-Po Akku verfügt über einen T-Plug Stecker und beinhaltet gleichzeitig ein Adapterkabel auf Mini-Tamiya. Er ist dreiteilig und durch die Verwendung der neusten Akku-Zellen superschlank. Mit den Abmessungen  117mm x 16mm x 6,5mm pro Zelle (ohne das Kabel) dürfte dieser Airsoft-Akku der schmalste Triple-Stick auf dem Markt sein! Der Akku hat 11,1V Spannung und eine Ladekapazität von 1450mAh. Die Entladerate liegt bei 30C UNBEDINGT beachten: Besonders bei LiPo Akkus ist es zwingend notwendig, nur geeignete LiPo Ladegeräte mit eingebautem Balancer zu werden. Der max. Ladestrom darf höchstens 1C (einfache Kapazität) betragen, d.h. bei einer 1100mAh Zelle max. 1100mA. Lithium Polymer Akkus sind elektrisch und thermisch empfindlich: Überladen, Tiefentladen, zu hohe Ströme, Betrieb bei zu hohen (größer 60 °C) oder zu niedrigen Temperaturen (kleiner 0 °C) und Lagern in entladenem Zustand schädigen oder zerstören die Zellen in den meisten Fällen. Hier sind nur die jeweiligen Ladegeräte freigegeben. Bitte beachten Sie auch in jedem Fall die dem Akku beiliegenden Warnhinweise. Nur verwenden bei Waffen, die auch als LiPo ready angegeben sind.  WICHTIGE SICHERHEITSINFORMATIONEN: 1. Niemals unbeaufsichtigt aufladen 2. Auf einen feuerfesten Untergrund stellen 3. darauf achten das sich die kabel nicht beim einlegen in die Waffe abisolieren! Lieferumfang: 1x BEARS-TEC® Airsoft LiPo Akku 11.1V 1450mAh, 30C dreiteilig - T-Plug 1x Adapterkabel von T-Plug auf Mini-Tamiya

e3 Lipo Battery Balance Charger / Ladegerät - Nimrod1. Bitte schließen Sie zunächst das Ladegerät an den Strom an, die drei Power-LEDs leuchten grün, was darauf hinweist, dass das Ladegerät einwandfrei arbeitet.2. (3s Akku zum Beispiel) Schließen Sie den Akku 3s an den Balancer an, die drei Power-LEDs ändern ihre Farbe in rot  und der Ladevorgang beginnt. Bitte beachten Sie, sobald der Ladevorgang einer Zelle geschehen ist, das die entsprechende Power-LED grün wird. 3. Wenn die drei Power-LEDs alle grün sind ist das Laden für den 3S Akku fertig. Beim Laden von einem 2S Akku leuchten entsprechend nur zwei der Power LEDs und bei einem 1S Akku leuchten entsprechend nur eine der Power LEDs.Lieferumfang: Ladegerät, Kabel

Hervorragendes Allround Gas für Frühling, Sommer und Herbst, sowie milde Wintertage. Bestens geeignet für eine grosse Bandbreite von Pistolen und Gewehren. Das Gas eignet sich nicht für kalte Wintertemperaturen, sowie Pistolen und Gewehre aus japanischer Produktion. Das Gas hat einen sehr konstanten Druck, sorgt für eine optimale Flugbahn und steigert die Performance der Waffe signifikant. Druck bei 20°C: 1.0 Mpa / 145 Psi / 10 BarKapazität: 1000mlFüllmenge: 260g / 500mlHinweis:  Es fallen bei diesem Gas KEINE extra Versandkosten für Gefahrguttransport an. Preis gilt für 1 (eine) 1000ml Flasche (260g Inhalt) Gefahrenhinweise: Extrem entzündbares Aerosol. Behälter steht unter Druck: Kann bei Erwärmung bersten. Sicherheitshinweise: Darf nicht in die Hände von Kindern gelangen. Von Hitze, heißen Oberflächen, Funken, offenen Flammen sowie anderen Zündquellenarten fernhalten. Nicht rauchen. Nicht gegen offene Flamme oder andere Zündquelle sprühen. Nicht durchstechen oder verbrennen, auch nicht nach Gebrauch. Lagerung: Vor Sonnenbestrahlung schützen. Nicht Temperaturen über 50 °C/122 °F aussetzen.Entsorgung: Inhalt/Behälter Recycling zuführen.

Snickers! Milchschokolade, gefüllt mit feiner Candy-Creme (16%), Karamell (27%) und gerösteten Erdnüssen (22%) Das unschlagbare Original: Unter der knackigen Schale aus Vollmilch stecken Erdnüsse von bester Qualität, die Snickers® den  unverwechselbaren Geschmack geben. Die leckere Candy-Creme und das zarte Karamell vollenden das Meisterwerk und machen Snickers® zu einem der beliebtesten Snacks der Welt.   Zutaten Zucker, Glukosesirup, Erdnüsse, Magermilchpulver, Kakaobutter, Kakaomasse, Milchzucker, Sonnenblumenöl, Butterreinfett (aus Milch), Süssmolkenpulver (aus Milch), Palmfett, Salz, Emulgator (Sojalecithin), Hühnerei-Trockeneiweiß, Kokosnussöl, Milcheiweißhydrolysat, natürlicher Vanilleextrakt Zusatzstoffe • Emulgator • Lecithine (E322) Nährwerte Nährwert pro 100 Gramm: Energie: 2026kJ/484kcal Fett: 22,9g davon gesättigte Fettsäuren: 8,4g Kohlenhydrate: 60,2g davon Zucker: 51,6g Eiweiß: 8,7g Salz: 0,63g Allergikerhinweis • Eier und Eierzeugnisse • Haselnuss und Haselnusserzeugnisse • Milchzucker (Laktose) • Milch und Milcherzeugnisse • Nüsse und Nusserzeugnisse • Erdnüsse und Erdnusserzeugnisse • Soja und Sojaerzeugnisse Spuren • Haselnuss und Haselnusserzeugnisse • Nüsse und Nusserzeugnisse Lagerungshinweise Kühl und trocken an einem dunklen Ort aufbewahren, nicht im Kühlschrank.

Das G&G Barrel Cover, auf deutsch auch Laufsocke genannt, diemt zum sichern der Laufmündung indem es über diese gestülpt wird. Sollte sich wieder erwarten ein Schuss lösen so wird dieser durch die Barrel Socke gestoppt.Laufsocken sind meist auf Spielfeldern mit "Paintball Historie" pflicht.