G&G TR16 MBR 308SR G2H with ETU in black Airsoft adult only - S-AEG -F-G&G TR16 MBR 308SR G2H with ETU in black Airsoft adult only - S-AEG -F-
G&G TR16 MBR 308SR G2H with ETU in black Airsoft adult only - S-AEG -F-
The G&G G&G TR16 S-AEG softair rifle in 6 mm BB caliber with E.T.U. (Electronic Trigger Unit) and approx. 2,1 joules of energy belongs to the GC series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the G&G TR16 clearly belongs in the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes extremely high-quality materials here with a very pleasant and realistic feel. Once in your hand, you won't want to put it down. The handguard with keymod made of aluminum is CNC milled and absolutely accurately connected to the body. Nothing wobbles, crunches or creaks. Here G&G has recognized the advantages of the Keymod system and improved compared to other manufacturers. Since G&G only processes high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod attachments that are available on the market fit on the handguard. On the aluminum handguard and the Body Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a gas release system mimicked on the outer barrel. The fire selector lever is located on the left side, right side and engages perfectly on the various Settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The TR16 comes with a ´lowcap magazine. The magazine holds approximately 40 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C before about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. At the bottom of the shaft is a compartment to hold e.g. two CR123 batteries. This compartment can be folded out via a locking knob. The shaft can be adjusted in 5 positions and can be locked in any position. At the upper end of the stock there is a hole on both sides for mounting Quick Release Sling Mounts. The built-in E.T.U (Electronic Trigger Unit) provides fast response and an extremely high rate of fire. In our extensive testing, it was not possible to jam the model (using an 11.1 volt triple-stick Lipo battery) no matter how fast the trigger was pulled in succession (however, a clean firing cycle is a prerequisite) to prevent triggering issues we recommend installing a Gate TITAN™. Due to the micro switch installed on the switch unit, which controls the E.T.U, there is also a clean "pressure point" and you can accurately estimate when the shot breaks. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8mm ball bearings. The inner Barrel form G&G TR16  is about 400mm long. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. Muzzle velocity is max 475FPS with 0.20g BB's, equivalent to 2.1 joules of Energy. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

€479.90*
pcs.
G&G TR16 MBR 308WH G2H with ETU in black Airsoft adult only - S-AEG -F-G&G TR16 MBR 308WH G2H with ETU in black Airsoft adult only - S-AEG -F-
G&G TR16 MBR 308WH G2H with ETU in black Airsoft adult only - S-AEG -F-
The G&G G&G TR16 S-AEG softair rifle in 6 mm BB caliber with E.T.U. (Electronic Trigger Unit) and approx. 2,1 joules of energy belongs to the GC series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the G&G TR16 clearly belongs in the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes extremely high-quality materials here with a very pleasant and realistic feel. Once in your hand, you won't want to put it down. The handguard with keymod made of aluminum is CNC milled and absolutely accurately connected to the body. Nothing wobbles, crunches or creaks. Here G&G has recognized the advantages of the Keymod system and improved compared to other manufacturers. Since G&G only processes high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod attachments that are available on the market fit on the handguard. On the aluminum handguard and the Body Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a gas release system mimicked on the outer barrel. The fire selector lever is located on the left side, right side and engages perfectly on the various settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The TR16 comes with a ´lowcap magazine. The magazine holds approximately 40 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C before about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. At the bottom of the shaft is a compartment to hold e.g. two CR123 batteries. This compartment can be folded out via a locking knob. The shaft can be adjusted in 5 positions and can be locked in any position. At the upper end of the stock there is a hole on both sides for mounting Quick Release Sling Mounts. The built-in E.T.U (Electronic Trigger Unit) provides fast response and an extremely high rate of fire. In our extensive testing, it was not possible to jam the model (using an 11.1 volt triple-stick Lipo battery) no matter how fast the trigger was pulled in succession (however, a clean firing cycle is a prerequisite) to prevent triggering issues we recommend installing a Gate TITAN™. Due to the micro switch installed on the switch unit, which controls the E.T.U, there is also a clean "pressure point" and you can accurately estimate when the shot breaks. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8mm ball bearings. The inner Barrel form G&G TR16  is about 400mm long. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. Muzzle velocity is max 475FPS with 0.20g BB's, equivalent to 2.1 joules of Energy. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

€479.90*
pcs.
G&G TR16 MBR 308 M-LOK Kompatibel G2H with ETU in black Airsoft adult only - S-AEG -F-G&G TR16 MBR 308 M-LOK Kompatibel G2H with ETU in black Airsoft adult only - S-AEG -F-
G&G TR16 MBR 308 M-LOK Kompatibel G2H with ETU in black Airsoft adult only - S-AEG -F-
The G&G G&G TR16 M-LOK S-AEG softair rifle in 6 mm BB caliber with E.T.U. (Electronic Trigger Unit) and approx. 2,1 joules of energy belongs to the GC series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the G&G TR16 M-LOK clearly belongs in the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes extremely high-quality materials here with a very pleasant and realistic feel. Once in your hand, you won't want to put it down. The handguard with keymod made of aluminum is CNC milled and absolutely accurately connected to the body. Nothing wobbles, crunches or creaks. Here G&G has recognized the advantages of the Keymod system and improved compared to other manufacturers. Since G&G only processes high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod attachments that are available on the market fit on the handguard. On the aluminum handguard and the Body Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a gas release system mimicked on the outer barrel. The fire selector lever is located on the left side, right side and engages perfectly on the various Settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The TR16 comes with a ´lowcap magazine. The magazine holds approximately 40 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C before about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. At the bottom of the shaft is a compartment to hold e.g. two CR123 batteries. This compartment can be folded out via a locking knob. The shaft can be adjusted in 5 positions and can be locked in any position. At the upper end of the stock there is a hole on both sides for mounting Quick Release Sling Mounts. The built-in E.T.U (Electronic Trigger Unit) provides fast response and an extremely high rate of fire. In our extensive testing, it was not possible to jam the model (using an 11.1 volt triple-stick Lipo battery) no matter how fast the trigger was pulled in succession (however, a clean firing cycle is a prerequisite) to prevent triggering issues we recommend installing a Gate TITAN™. Due to the micro switch installed on the switch unit, which controls the E.T.U, there is also a clean "pressure point" and you can accurately estimate when the shot breaks. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8mm ball bearings. The inner Barrel form G&G TR16 M-LOK  is about 400mm long. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. Muzzle velocity is max 475FPS with 0.20g BB's, equivalent to 2.1 joules of Energy. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

€479.90*
pcs.

Magazine Pouch

Fast Rifle Magazine Pouch Multicam Tropic - Templar´s GearFast Rifle Magazine Pouch Multicam Tropic - Templar´s Gear
Fast Rifle Magazine Pouch Multicam Tropic - Templar´s Gear
Fast Rifle Magazine Pouch - Templar´s GearMaterail: 100% Polyamide

€22.90*
pcs.
Double Fast Rifle Magazine Pouch Multicam - Templar´s GearDouble Fast Rifle Magazine Pouch Multicam - Templar´s Gear
Double Fast Rifle Magazine Pouch Multicam - Templar´s Gear
Double Fast Rifle Magazine Pouch - Templar´s GearMaterial: 100% Polyamide

€32.90*
pcs.
Double Fast Rifle Magazine Pouch Multicam Tropic - Templar´s GearDouble Fast Rifle Magazine Pouch Multicam Tropic - Templar´s Gear
Double Fast Rifle Magazine Pouch Multicam Tropic - Templar´s Gear
Double Fast Rifle Magazine Pouch - Templar´s GearMaterial: 100% Polyamide

€32.90*
pcs.
Fast Rifle Magazine Pouch Ranger Green - Templar´s GearFast Rifle Magazine Pouch Ranger Green - Templar´s Gear
Fast Rifle Magazine Pouch Ranger Green - Templar´s Gear
Fast Rifle Magazine Pouch - Templar´s GearMaterail: 100% Polyamide

€22.90*
pcs.
Double Fast Rifle Magazine Pouch Coyote - Templar´s GearDouble Fast Rifle Magazine Pouch Coyote - Templar´s Gear
Double Fast Rifle Magazine Pouch Coyote - Templar´s Gear
Double Fast Rifle Magazine Pouch - Templar´s GearMaterial: 100% Polyamid

€32.90*
pcs.
Double Fast Rifle Magazine Pouch Black - Templar´s GearDouble Fast Rifle Magazine Pouch Black - Templar´s Gear
Double Fast Rifle Magazine Pouch Black - Templar´s Gear
Double Fast Rifle Magazine Pouch - Templar´s GearMaterial: 100% Polyamid

€32.90*
pcs.
Fast Rifle Magazine Pouch Black - Templar´s GearFast Rifle Magazine Pouch Black - Templar´s Gear
Fast Rifle Magazine Pouch Black - Templar´s Gear
Fast Rifle Magazine Pouch - Templar´s GearMaterail: 100% Polyamid

€22.90*
pcs.
Fast Rifle Magazine Pouch Coyote - Templar´s GearFast Rifle Magazine Pouch Coyote - Templar´s Gear
Fast Rifle Magazine Pouch Coyote - Templar´s Gear
Fast Rifle Magazine Pouch - Templar´s GearMaterail: 100% Polyamid

€22.90*
pcs.

Cutsomers also bought

G&G TR16 SBR 308 Mk2 G2H with ETU in black Airsoft adult only - S-AEG -F-
G&G TR16 SBR 308 Mk2 G2H with ETU in black Airsoft adult only - S-AEG -F-
The G&G G&G TR16 SBR 308 S-AEG softair rifle in 6 mm BB caliber with E.T.U. (Electronic Trigger Unit) and approx. 1,5 joules of energy belongs to the GC series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the G&G TR16 clearly belongs in the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes extremely high-quality materials here with a very pleasant and realistic feel. Once in your hand, you won't want to put it down. The handguard with keymod made of aluminum is CNC milled and absolutely accurately connected to the body. Nothing wobbles, crunches or creaks. Here G&G has recognized the advantages of the Keymod system and improved compared to other manufacturers. Since G&G only processes high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod attachments that are available on the market fit on the handguard. On the aluminum handguard and the Body Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a gas release system mimicked on the outer barrel. The fire selector lever is located on the left Side, right Side and engages perfectly on the various settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The TR16 comes with a ´lowcap magazine. The magazine holds approximately 40 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C before about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. At the bottom of the shaft is a compartment to hold e.g. two CR123 batteries. This compartment can be folded out via a locking knob. The shaft can be adjusted in 5 positions and can be locked in any position. At the upper end of the stock there is a hole on both sides for mounting Quick Release Sling Mounts. The built-in E.T.U (Electronic Trigger Unit) provides fast response and an extremely high rate of fire. In our extensive testing, it was not possible to jam the model (using an 11.1 volt triple-stick Lipo battery) no matter how fast the trigger was pulled in succession (however, a clean firing cycle is a prerequisite) to prevent triggering issues we recommend installing a Gate TITAN™. Due to the micro switch installed on the switch unit, which controls the E.T.U, there is also a clean "pressure point" and you can accurately estimate when the shot breaks. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8mm ball bearings. The inner Barrel form G&G TR16 SBR 308  is about 400mm long. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. Muzzle velocity is max 400FPS with 0.20g BB's, equivalent to 1,5 joules of Energy. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

€468.90*
pcs.
Sold out
M&M'S Chocolate 45g Beutel
M&M'S Chocolate 45g Beutel
Aufreißen, reingreifen, losknabbern. M&m's Choco gibt es seit 1941. Die knackigen und gleichzeitig zartschmelzenden Schokolinsen gehören zu den beliebtesten Knabberartikeln weltweit. Sie sind immer noch genauso lecker und lustig wie zu ihren Ursprungszeiten. Die mundgerechten Schoko-Snacks sind aus Milchschokolade hergestellt und verfügen über eine knusprige Zuckerhülle. Zutaten Zucker, Kakaomasse, VOLLMILCHPULVER, MILCHZUCKER, Kakaobutter, Stärke, Palmfett, Glukosesirup, Sheafett, Stabilisator (Gummi arabicum), Emulgator (SOJALECITHIN), Farbstoffe (E100, E133, E160a, E160e, E162, E170, E172), Dextrin, Überzugsmittel (Carnaubawachs), Palmkernöl, Salz, natürlicher Vanilleextrakt, Aroma. (Kann enthalten: ERDNUSS, MANDEL, HASELNUSS). Nährwerte Nährwert pro 100 Gramm: Energie:2019kJ/481kcal Fett:19,0g davon gesättigte Fettsäuren:12,0g Kohlenhydrate:71,0g davon Zucker:67g Eiweiß:5,0g Salz:0,13g Allergikerhinweis • Milch (inkl. Lactose) und daraus hergestellte Erzeugnisse • Sojabohnen und daraus hergestellte Erzeugnisse • Erdnüsse und daraus hergestellte Erzeugnisse Spuren • Schalenfrüchte (d. h. Walnüsse, Cashewnüsse bzw. Kaschunüsse, Haselnüsse, Macadamianüsse bzw. Australnüsse bzw. Queenslandnüsse, Mandeln, Paranüsse, Pecannüsse, Pistazien) und daraus hergestellte Erzeugnisse Lagerungshinweise Kühl und trocken an einem dunklen Ort aufbewahren, nicht im Kühlschrank.

€0.76*
Sold out
M&M'S Crispy 36g Beutel
M&M'S Crispy 36g Beutel
Der Knusper-Snack. M&M 's Crispy ist der bunte und mundgerechte Knabberspaß. Erleben Sie den dreifachen Genuss - bestehend aus einem Kern aus Knusperreis, umhüllt von köstlicher Milch-Schokolade und eingeschlossen in eine knackige Zuckerschale. Zutaten Zutaten: Zucker, Kakaomasse, Reismehl (9.5%), MAGERMILCHPULVER, Kakaobutter, Palmkernfett, MILCHZUCKER, Palmfett, Stärke, Butterreinfett (aus MILCH), Glukosesirup, GERSTENMALZEXTRAKT, Sheafett, Stabilisator (Gummi arabicum), Salz, Emulgator (SOJALECITHIN), Dextrin, Dextrose, Überzugsmittel (Carnaubawachs), Farbstoffe (E100, E120, E133, E160a, E160e, E170), Aromen, Palmkernöl. (Kann enthalten: ERDNUSS, HASELNUSS, MANDEL). Nährwerte Nährwert pro 100 Gramm: Energie:2033kJ/485kcal Fett:21,0g davon gesättigte Fettsäuren:14,0g Kohlenhydrate:69,0g davon Zucker:57g Eiweiß:4,2g Salz:0,32g Allergikerhinweis • Milch (inkl. Lactose) und daraus hergestellte Erzeugnisse • Sojabohnen und daraus hergestellte Erzeugnisse • Erdnüsse und daraus hergestellte Erzeugnisse Spuren • Schalenfrüchte (d. h. Walnüsse, Cashewnüsse bzw. Kaschunüsse, Haselnüsse, Macadamianüsse bzw. Australnüsse bzw. Queenslandnüsse, Mandeln, Paranüsse, Pecannüsse, Pistazien) und daraus hergestellte Erzeugnisse Lagerungshinweise Kühl und trocken an einem dunklen Ort aufbewahren, nicht im Kühlschrank.

€0.76*
Universal Polymer Holster für B&T USW A1 - Strike Systems
Universal Polymer Holster für B&T USW A1 - Strike Systems
Universal Polymer Holster für B&T USW A1 - Strike Systems Bitte beachten: Die abgebildete Airsoft gehört nicht zum Lieferumfang!

€54.90*
pcs.
Sold out
Mosfet 3.0 for G&G CM16/GC16 SR Series with Mosfet
Mosfet 3.0 for G&G CM16/GC16 SR Series with Mosfet
Mosfet 3.0 for G&G CM16/GC16 SR Series with Mosfet

€27.90*
Front and Rear Sight, Scorpion EVO 3 - A1
Front and Rear Sight, Scorpion EVO 3 - A1
Front and Rear Sight, Scorpion EVO 3 - A1

€19.90*
set
rum-static.pingdom.net/pa-65d5f49168cac40012000789.js