M4/M16 Drum Magazin in Black (2300 BBs) - G&G

ACHTUNG! Im Gegensatz zur -F- Variante verträgt die 0,5 Joule Variante keine 11.1v LiPo Akkus! Mündungsgeschwindigkeit (0.20g): ca. 225 fps (0.46 Joule) Effektive Schussweite (0.20g): ca. 31 Meter Die G&G CM16 SRS ist die Weiterentwicklung der beliebten CM16 Serie.  Wie Ihr Vorgänger verfügt sie über einen sehr hochwertigen aus Faserverstärktem Kunststoff hergestellten Body im aufgefrischten Design. Der Handguard ist dem KMOD Design nachempfunden und verfügt seitlich über 7 Steckpositionen. Die RIS Schiene oben ist komplett durchgehend. Neu an dieser Waffe ist die Mikroschalter-Abzugseinheit mit Mosfet. Ähnlich einer ASCU hat man nun die Vorteile einer Switchunit mit Mikroschalter. Das ausserhalb der Gearbox sitzende Mosfet ist für LiPo Batterien geeignet. Hier sollten ausschließlich qualitativ hochwertige Akkus die speziell für den Airsoftbereich entwickelt wurden verwendet werden. Hohe Triggergeschwindigkeit ist aber nicht der einzige Vorteil der ETU. Für die 0,5 Joule Modelle lässt sich die ETU von Vollauto auf Burst umprogrammieren. Wie alle CM16 Modelle ist die SR die ideale Softair für Einsteiger. Die Materialien sowie die Verarbeitung sind wie von G&G bekannt hervorragend und der Body kann nachweislich mehr ab als Zinkdruckgussmodelle aus China. Mit der neuen Abzugstechnologie geht G&G einen weiteren Schritt in die richtige Richtung, weg von alten Fesseln hin zu modernen Airsoftmodellen die hohe Feuerraten und Langlebigkeit garantieren.                 Ein Akku ist im Lieferumfang nicht inbegriffen. Ein Ladegerät ist im Lieferumfang nicht inbegriffen.

ACHTUNG! Im Gegensatz zur -F- Variante verträgt die 0,5 Joule Variante keine 11.1v LiPo Akkus! Mündungsgeschwindigkeit (0.20g): ca. 225 fps (0.46 Joule) Effektive Schussweite (0.20g): ca. 31 Meter Die G&G CM16 SRXL ist die Weiterentwicklung der beliebten CM16 Serie.  Wie Ihr Vorgänger verfügt sie über einen sehr hochwertigen aus Faserverstärktem Kunststoff hergestellten Body im aufgefrischten Design. Der Handguard ist dem KMOD Design nachempfunden und verfügt seitlich über 14 Steckpositionen. Die RIS Schiene oben ist komplett durchgehend. Neu an dieser Waffe ist die Mikroschalter-Abzugseinheit mit Mosfet. Ähnlich einer ASCU hat man nun die Vorteile einer Switchunit mit Mikroschalter. Das ausserhalb der Gearbox sitzende Mosfet ist für LiPo Batterien geeignet. Hier sollten ausschließlich qualitativ hochwertige Akkus die speziell für den Airsoftbereich entwickelt wurden verwendet werden. Hohe Triggergeschwindigkeit ist aber nicht der einzige Vorteil der ETU. Für die 0,5 Joule Modelle lässt sich die ETU von Vollauto auf Burst umprogrammieren. Wie alle CM16 Modelle ist die SR die ideale Softair für Einsteiger. Die Materialien sowie die Verarbeitung sind wie von G&G bekannt hervorragend und der Body kann nachweislich mehr ab als Zinkdruckgussmodelle aus China. Mit der neuen Abzugstechnologie geht G&G einen weiteren Schritt in die richtige Richtung, weg von alten Fesseln hin zu modernen Airsoftmodellen die hohe Feuerraten und Langlebigkeit garantieren.                     Ein Akku ist im Lieferumfang nicht inbegriffen. Ein Ladegerät ist im Lieferumfang nicht inbegriffen.

Die G&G CM16 SRS ist die Weiterentwicklung der beliebten CM16 Serie.  Wie Ihr Vorgänger verfügt sie über einen sehr hochwertigen aus Faserverstärktem Kunststoff hergestellten Body im aufgefrischten Design. Der Handguard ist dem KMOD Design nachempfunden und verfügt seitlich über 7 Steckpositionen. Die RIS Schiene oben ist komplett durchgehend. Im Gegensatz zur CM16 Serie ist der Handguard aber hier aus Metall. Neu an dieser Waffe ist die Mikroschalter-Abzugseinheit mit Mosfet. Ähnlich einer ASCU hat man nun die Vorteile einer Switchunit mit Mikroschalter. Das ausserhalb der Gearbox sitzende Mosfet ist für LiPo Batterien geeignet. Hier sollten ausschließlich qualitativ hochwertige Akkus die speziell für den Airsoftbereich entwickelt wurden verwendet werden. Hohe Triggergeschwindigkeit ist aber nicht der einzige Vorteil der ETU. Wie alle CM16 Modelle ist die SR die ideale Softair für Einsteiger. Die Materialien sowie die Verarbeitung sind wie von G&G bekannt hervorragend und der Body kann nachweislich mehr ab als Zinkdruckgussmodelle aus China. Mit der neuen Abzugstechnologie geht G&G einen weiteren Schritt in die richtige Richtung, weg von alten Fesseln hin zu modernen Airsoftmodellen die hohe Feuerraten und Langlebigkeit garantieren. Ein Akku ist im Lieferumfang nicht inbegriffen. Ein Ladegerät ist im Lieferumfang nicht inbegriffen. 

ACHTUNG! Im Gegensatz zur -F- Variante verträgt die 0,5 Joule Variante keine 11.1v LiPo Akkus! Mündungsgeschwindigkeit (0.20g): ca. 225 fps (0.46 Joule)Effektive Schussweite (0.20g): ca. 31 Meter Die G&G CM16 SRL ist die Weiterentwicklung der beliebten CM16 Serie.  Wie Ihr Vorgänger verfügt sie über einen sehr hochwertigen aus Faserverstärktem Kunststoff hergestellten Body im aufgefrischten Design. Der Handguard ist dem KMOD Design nachempfunden und verfügt seitlich über 10 Steckpositionen. Die RIS Schiene oben ist komplett durchgehend. Neu an dieser Waffe ist die Mikroschalter-Abzugseinheit mit Mosfet. Ähnlich einer ASCU hat man nun die Vorteile einer Switchunit mit Mikroschalter. Das ausserhalb der Gearbox sitzende Mosfet ist für LiPo Batterien geeignet. Hier sollten ausschließlich qualitativ hochwertige Akkus die speziell für den Airsoftbereich entwickelt wurden verwendet werden. Hohe Triggergeschwindigkeit ist aber nicht der einzige Vorteil der ETU. Für die 0,5 Joule Modelle lässt sich die ETU von Vollauto auf Burst umprogrammieren. Wie alle CM16 Modelle ist die SR die ideale Softair für Einsteiger. Die Materialien sowie die Verarbeitung sind wie von G&G bekannt hervorragend und der Body kann nachweislich mehr ab als Zinkdruckgussmodelle aus China. Mit der neuen Abzugstechnologie geht G&G einen weiteren Schritt in die richtige Richtung, weg von alten Fesseln hin zu modernen Airsoftmodellen die hohe Feuerraten und Langlebigkeit garantieren. Kaliber: 6mm BB Hop-Up: Einstellbar Energie (max.): 0,5 JouleSchussmodus: Semi- und vollautomatischGewinde des Mündungsfeuerdämpfers: 14mm CCW Magazinkapazität: 300 BBs Länge: 810 mm Innenlauf: 260mm Bearing: 8mm Receiver: Kunststoff Handguard: MetallBlow Back: nein ROF: 19.2-19.3 Stecker: Mini Tamiya Empfohlener Akku: 7.4V LiPo mit 20C/25C max. 1600mAh                               oder 7.4 V Lipo mit 20C 2200/2600mAh Gewicht: 2.3 kg Gewicht mit Verpackung: 4,5 kg Ein Akku ist im Lieferumfang nicht inbegriffen. Ein Ladegerät ist im Lieferumfang nicht inbegriffen.

The G&G CM16 SRXL S-AEG softair rifle in 6 mm BB caliber with E.T.U. (Electronic Trigger Unit) and approx. 1.5 joules of energy belongs to the CM (Combat Machine) series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the CM16 SRXL clearly belongs in the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes extremely high-quality materials here with a very pleasant and realistic feel. Once in your hand, you won't want to put it down. The handguard with keymod made of aluminum is CNC milled and absolutely accurately connected to the body. Nothing wobbles, crunches or creaks. Here G&G has recognized the advantages of the Keymod system and improved compared to other manufacturers. Since G&G only processes high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod attachments that are available on the market fit on the handguard. On the aluminum handguard and the Body Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. The mounted muzzle flash hider is made of polymer and has a male thread on which SCAR compatible dummy silencers can be mounted. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a gas release system mimicked on the outer barrel. The fire selector lever is located on the left side and engages perfectly on the various settings. For left hand shooters who want to have their fire selector lever on the right side as well, the GC series from G&G is just made for them. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The CM16 SRL comes with a rubberized highcap magazine. The magazine holds approximately 300 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C before about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. At the bottom of the shaft is a compartment to hold e.g. two CR123 batteries. This compartment can be folded out via a locking knob. The shaft of the SRL can be adjusted in 5 positions and can be locked in any position. At the upper end of the stock there is a hole on both sides for mounting Quick Release Sling Mounts. The built-in E.T.U (Electronic Trigger Unit) provides fast response and an extremely high rate of fire. In our extensive testing, it was not possible to jam the model (using an 11.1 volt triple-stick Lipo battery) no matter how fast the trigger was pulled in succession (however, a clean firing cycle is a prerequisite) to prevent triggering issues we recommend installing a Gate TITAN™. Due to the micro switch installed on the switch unit, which controls the E.T.U, there is also a clean "pressure point" and you can accurately estimate when the shot breaks. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8mm ball bearings. The inner barrel of the SRXL is about 3300mm long. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. Muzzle velocity is max 400FPS with 0.20g BB's, equivalent to 1.5 joules of energy. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

The G&G CM16 SRXL S-AEG softair rifle in 6 mm BB caliber with E.T.U. (Electronic Trigger Unit) and approx. 1.5 joules of energy belongs to the CM (Combat Machine) series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the CM16 SRXL clearly belongs in the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes extremely high-quality materials here with a very pleasant and realistic feel. Once in your hand, you won't want to put it down. The handguard with keymod made of aluminum is CNC milled and absolutely accurately connected to the body. Nothing wobbles, crunches or creaks. Here G&G has recognized the advantages of the Keymod system and improved compared to other manufacturers. Since G&G only processes high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod attachments that are available on the market fit on the handguard. On the aluminum handguard and the Body Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. The mounted muzzle flash hider is made of polymer and has a male thread on which SCAR compatible dummy silencers can be mounted. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a gas release system mimicked on the outer barrel. The fire selector lever is located on the left side and engages perfectly on the various settings. For left hand shooters who want to have their fire selector lever on the right side as well, the GC series from G&G is just made for them. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The CM16 SRL comes with a rubberized highcap magazine. The magazine holds approximately 300 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C before about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. At the bottom of the shaft is a compartment to hold e.g. two CR123 batteries. This compartment can be folded out via a locking knob. The shaft of the SRL can be adjusted in 5 positions and can be locked in any position. At the upper end of the stock there is a hole on both sides for mounting Quick Release Sling Mounts. The built-in E.T.U (Electronic Trigger Unit) provides fast response and an extremely high rate of fire. In our extensive testing, it was not possible to jam the model (using an 11.1 volt triple-stick Lipo battery) no matter how fast the trigger was pulled in succession (however, a clean firing cycle is a prerequisite) to prevent triggering issues we recommend installing a Gate TITAN™. Due to the micro switch installed on the switch unit, which controls the E.T.U, there is also a clean "pressure point" and you can accurately estimate when the shot breaks. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8mm ball bearings. The inner barrel of the SRXL is about 330mm long. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. Muzzle velocity is max 400FPS with 0.20g BB's, equivalent to 1.5 joules of energy. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

The G&G CM16 SRXL S-AEG softair rifle in 6 mm BB caliber with E.T.U. (Electronic Trigger Unit) and approx. 1.5 joules of energy belongs to the CM (Combat Machine) series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the CM16 SRXL clearly belongs in the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes extremely high-quality materials here with a very pleasant and realistic feel. Once in your hand, you won't want to put it down. The handguard with keymod made of aluminum is CNC milled and absolutely accurately connected to the body. Nothing wobbles, crunches or creaks. Here G&G has recognized the advantages of the Keymod system and improved compared to other manufacturers. Since G&G only processes high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod attachments that are available on the market fit on the handguard. On the aluminum handguard and the Body Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. The mounted muzzle flash hider is made of polymer and has a male thread on which SCAR compatible dummy silencers can be mounted. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a gas release system mimicked on the outer barrel. The fire selector lever is located on the left side and engages perfectly on the various settings. For left hand shooters who want to have their fire selector lever on the right side as well, the GC series from G&G is just made for them. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The CM16 SRL comes with a rubberized highcap magazine. The magazine holds approximately 300 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C before about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. At the bottom of the shaft is a compartment to hold e.g. two CR123 batteries. This compartment can be folded out via a locking knob. The shaft of the SRL can be adjusted in 5 positions and can be locked in any position. At the upper end of the stock there is a hole on both sides for mounting Quick Release Sling Mounts. The built-in E.T.U (Electronic Trigger Unit) provides fast response and an extremely high rate of fire. In our extensive testing, it was not possible to jam the model (using an 11.1 volt triple-stick Lipo battery) no matter how fast the trigger was pulled in succession (however, a clean firing cycle is a prerequisite) to prevent triggering issues we recommend installing a Gate TITAN™. Due to the micro switch installed on the switch unit, which controls the E.T.U, there is also a clean "pressure point" and you can accurately estimate when the shot breaks. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8mm ball bearings. The inner barrel of the SRXL is about 330mm long. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. Muzzle velocity is max 400FPS with 0.20g BB's, equivalent to 1.5 joules of energy. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

The G&G CM16 SRXL S-AEG softair rifle in 6 mm BB caliber with E.T.U. (Electronic Trigger Unit) and approx. 1.5 joules of energy belongs to the CM (Combat Machine) series and is the G&G Armament entry-level series. However, there are massive differences here to entry-level models from other manufacturers, because the CM16 SRXL clearly belongs in the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft weapon, is made of fiber-reinforced high-performance polymer and is extremely stable. G&G processes extremely high-quality materials here with a very pleasant and realistic feel. Once in your hand, you won't want to put it down. The handguard with keymod made of aluminum is CNC milled and absolutely accurately connected to the body. Nothing wobbles, crunches or creaks. Here G&G has recognized the advantages of the Keymod system and improved compared to other manufacturers. Since G&G only processes high-quality aluminum can be dispensed with a thicker material thickness there. Due to the precise processing of the material, all common Keymod attachments that are available on the market fit on the handguard. On the aluminum handguard and the Body Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are also made of aluminum and are hinged as a "flip-up" design. The outer barrel is made of aluminum with the same accuracy as the handguard and has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. The mounted muzzle flash hider is made of polymer and has a male thread on which SCAR compatible dummy silencers can be mounted. G&G also put a lot of thought into a realistic look and didn't miss the opportunity to install a gas release system mimicked on the outer barrel. The fire selector lever is located on the left side and engages perfectly on the various settings. For left hand shooters who want to have their fire selector lever on the right side as well, the GC series from G&G is just made for them. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a receiver for risers on the left side. The magazine release for ejecting an empty magazine can be operated from either side of the gun. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the Charging Handle is easy to operate. The CM16 SRL comes with a rubberized highcap magazine. The magazine holds approximately 300 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for a 11.1 volt Lipo triple stick battery, these may also be used again with more than 25C before about 8 years ago this was still limited to max 15C. However, G&G has long since improved this. The battery is very easily stowed in the shaft. The rubber cover is unlocked and turned. At the bottom of the shaft is a compartment to hold e.g. two CR123 batteries. This compartment can be folded out via a locking knob. The shaft of the SRL can be adjusted in 5 positions and can be locked in any position. At the upper end of the stock there is a hole on both sides for mounting Quick Release Sling Mounts. The built-in E.T.U (Electronic Trigger Unit) provides fast response and an extremely high rate of fire. In our extensive testing, it was not possible to jam the model (using an 11.1 volt triple-stick Lipo battery) no matter how fast the trigger was pulled in succession (however, a clean firing cycle is a prerequisite) to prevent triggering issues we recommend installing a Gate TITAN™. Due to the micro switch installed on the switch unit, which controls the E.T.U, there is also a clean "pressure point" and you can accurately estimate when the shot breaks. The installed gearbox from G&G is the typical V2 G&G metal gearbox with 8mm ball bearings. The inner barrel of the SRXL is about 330mm long. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is exceptional in its class. Muzzle velocity is max 400FPS with 0.20g BB's, equivalent to 1.5 joules of energy. We recommend using high quality G&G BB's starting at 0.25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

ACHTUNG! Im Gegensatz zur -F- Variante verträgt die 0,5 Joule Variante keine 11.1v LiPo Akkus! Die G&G CM16 SRS ist die Weiterentwicklung der beliebten CM16 Serie.  Wie Ihr Vorgänger verfügt sie über einen sehr hochwertigen aus Faserverstärktem Kunststoff hergestellten Body im aufgefrischten Design. Der Handguard ist dem KMOD Design nachempfunden und verfügt seitlich über 7 Steckpositionen. Die RIS Schiene oben ist komplett durchgehend. Neu an dieser Waffe ist die Mikroschalter-Abzugseinheit mit Mosfet. Ähnlich einer ASCU hat man nun die Vorteile einer Switchunit mit Mikroschalter. Das ausserhalb der Gearbox sitzende Mosfet ist für LiPo Batterien geeignet. Hier sollten ausschließlich qualitativ hochwertige Akkus die speziell für den Airsoftbereich entwickelt wurden verwendet werden. Hohe Triggergeschwindigkeit ist aber nicht der einzige Vorteil der ETU. Für die 0,5 Joule Modelle lässt sich die ETU von Vollauto auf Burst umprogrammieren. Wie alle CM16 Modelle ist die SR die ideale Softair für Einsteiger. Die Materialien sowie die Verarbeitung sind wie von G&G bekannt hervorragend und der Body kann nachweislich mehr ab als Zinkdruckgussmodelle aus China. Mit der neuen Abzugstechnologie geht G&G einen weiteren Schritt in die richtige Richtung, weg von alten Fesseln hin zu modernen Airsoftmodellen die hohe Feuerraten und Langlebigkeit garantieren.                   Ein Akku ist im Lieferumfang nicht inbegriffen. Ein Ladegerät ist im Lieferumfang nicht inbegriffen.   

Wir empfehlen UNBEDINGT ein Gate Titan einbauen zu lassen da die Waffe über eine klassische Trigger-Unit verfügt und diese zu Gearjams führen kann. 2014 veröffentlichte G&G Armament die Fire Hawk, eine perfekt auf CQB abgestimmte Airsoft mit aggressiver Optik und einzigartigem Sound, welcher durch den charakteristischen Mündungsfeuerdämpfer erzeugt wird. 2015 kommt nun Ihr Nachfolger, die Fire Hawk HC05, die nun nicht nur mit Ihrem unverwechselbaren, überdurchschnittlich lauten Schussgeräusch punktet sondern ebenso mit einer enormen Feuerrate von 30 Schuss pro Sekunde!! Die Fire Hawk HC05 ist die HighCycle-Version der berühmt berüchtigten Fire Hawk und speziell für den deutschen Markt entwickelt. G&G hat es geschafft, die Waffe auf eine Kadenz von 30 Schuss pro Sekunde zu bringen. Die Firehawk HC05 ist ab Werk 11,1V LiPo ready. Das bedeutet es können Leistungsfähige Akkus verwendet werden um das Maximum aus der Waffe zu holen. Airsoftkeks hat in Zusammenarbeit mit Runlax eins der besten Reviews über unsere Fire Hawk HC05 abgeliefert das wir kennen. Dies möchten wir unseren Kunden natürlich nicht vorenthalten:             Die Besonderheiten der neuen HC05 sind im Einzelnen: - Fullauto only! Die neue Fire Hawk HC05 schießt bauartbedingt nur Vollautomatisch - Ein Kugelgelagerter Spring Guide sorgt dafür das die Feder immer in der richtigen Position sitzt - Das Bevel Gear wurde in einem besonders hochwertigen Spritzgussverfahren hergestellt - Das Double Sector und das Spur Gear wurden extra verstärkt und um 5mm verlängert - Selbstverständlich wird ein Vollstahlzahnpiston verwendet - Die Metall Hop-Up Kammer besteht aus einem Stück und ist in bekannter G&G Qualität - Ein Verbessertes HopUp Gummi sorgt auch bei kälteren Temperaturen für ein ordentliches Schussbild - Es kommen 8mm Keramikverstärkte Kugellager in einem 8,9mm Gehäuse zur Anwendung. Die G&G Fire Hawk HC05 verfügt wie Ihr Vorgänger über ein sehr hochwertiges aus Faserverstärktem Kunststoff hergestelltes R.I.S. System (Länge der unteren Rail: 90mm) und ist die ideale Softair für Einsteiger und natürlich auch für erfahrene CQB-Ler. Die Materialien sowie die Verarbeitung sind wie von G&G bekannt hervorragend und der Body kann sicherlich mehr ab als Zinkdruckgussmodell aus China. Ein Akku ist im Lieferumfang nicht inbegriffen. Ein Ladegerät ist im Lieferumfang nicht inbegriffen.  Bei Verwendung eines Schalldämpfers oder einer Tracerunit mit einem Durchmesser über 33mm, wird zwingend eine Laufverlängerung benötigt - Art. 8647798 (je nach Laufverlängerung kann ein Spalt zwischen Außenlauf und Adapter entstehen)    

Mars! Milchschokolade, gefüllt mit feiner Candy-Creme (32%) und Karamell (27%) Das Original: Unter der harten Schale aus Vollmilch steckt ein weicher Kern: Die leckere Candy Cream und eine zarte Karamellschicht machen Mars® zu dem, was es ist: Dein perfekter Schokoriegel. Einfach aufreißen und Spaß haben!  Zutaten Zucker, Glukosesirup, Kakaobutter, Vollmilchpulver, Kakaomasse, Sonnenblumenöl, Magermilchpulver, Milchzucker, Süßmolkenpulver (aus Milch), fettarmer Kakao, Butterreinfett (aus Milch), Gerstenmalzextrakt, Emulgator (Sojalecithin), Salz, Hühnerei-Trockeneiweiß, Palmfett, Milcheiweißhydrolysat, natürlicher Vanilleextrakt. (Kann enthalten: Erdnuss, Haselnuss) Zusatzstoffe • Emulgator • Lecithine (E322) Nährwerte Nährwert pro 100 Gramm: Energie: 1886kJ/449kcal davon gesättigte Fettsäuren: 8,3g Kohlenhydrate: 70,2g davon Zucker: 61,7g Eiweiß: 4,1g Salz: 0,42g Allergikerhinweis • Gerste und Gerstenerzeugnisse • Glutenhaltiges Getreide und glutenhaltige Getreideerzeugnisse • Eier und Eierzeugnisse • Haselnuss und Haselnusserzeugnisse • Milchzucker (Laktose) • Milch und Milcherzeugnisse (einschließlich Lactose) • Nüsse und Nusserzeugnisse • Erdnüsse und Erdnusserzeugnisse • Soja und Sojaerzeugnisse Spuren • Haselnuss und Haselnusserzeugnisse • Nüsse und Nusserzeugnisse • Erdnüsse und Erdnusserzeugnisse Lagerungshinweise Kühl und trocken an einem dunklen Ort aufbewahren, nicht im Kühlschrank.

BLS High Precisiongrade - 0,30g 3300 BB's

The softair rifle from Delta Armory now with ETU (Electronic Trigger Unit), with spring quick change system in calibre 6 mm BB with 0.5 joules, FullAuto and 3-round burst and improved internals, belongs to the Charlie series (The Charlie series is the high performance polymer series) and is the Delta Armory entry level rifle series. The rifles from the "Fully upgraded - No compromise" ETU series are the ideal sporting rifles you need from the beginning of your airsoft adventure through the advanced level up to the professional airsoft player. The Delta Armory ETU series is designed to save you an odyssey with problem guns. It will be your faithful companion from the beginning if you want it to be. Delta has gone beyond the standard entry-level systems and has used the best components in the development of the ETU series. These softair rifles are designed so that you don't have to study a thick manual to get started. All you have to do is insert your charged LiPo battery into the gun, connect it and fill the magazine with decent BB's. You're ready to go with your reliable companion. For the internals, only robust and very high quality mostly CNC milled products were used. The CNC milled 16:1 gears together with the neodymium magnet motor provide a top response and a high rate of fire, this guarantees you stress-free action and fun on the field. It is not a trick but experience that Delta Armory works for the special durability with 8mm bushings. These are contrary to the usual ball bearings significantly more durable and resistant. All highly stressed parts were made of steel or even stainless steel in the CNC process. Therefore, the cylinder, the steel teeth of the pistol and the springuide are made of these materials. Delta Armory uses proven systems for the cylinder head and delivers it CNC machined from aluminum with a double O-ring seal. Our experience has shown that this type of sealing does not look so spectacular but still provides the best sealing of the system compared to other systems. The whole system is optimized by the CNC-milled Nozzle with O-ring seal. Of course, the ETU series from Delta Armory no longer has Mini-Tamiya connectors installed, but relies on the better T-Dean connectors. They offer better current flow and therefore less resistance and more durability. On the high performance polymer handguard and the high performance polymer body is a Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all kinds of aiming aids whether scope or red dot sight can be mounted. Delta Armory has built in a horizontally and vertically adjustable rear sight and a height-adjustable front sight from the factory. The rear sight and front sight are flip-up. The outer barrel has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for house fighting. The fire selector lever is located on one side and locks perfectly on the various settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a mount for risers on the left and right sides. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the charging handle is easy to operate. The Delta Armory comes with a midcap magazine. The stock of the rifle has room for an 7.4 volt Lipo double-stick battery. Delta Armory's installed gearbox is a V2 metal gearbox with 8mm bearings. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is remarkable. Technical specifications (highlights are marked in bold) - CNC 16:1 gears - CNC Piston head - CNC Nozzle - CNC Stainless Steel Cylinder - CNC stainless steel spring guide - High Torque Motor with super strong Neodymium magnets - 6,03mm tuning barrel - SHS piston with full metal teeth - QRS spring quick change system gen.without disassembly of the rifle - QRS motor quick change - Rotery hop-up chamber - High quality 8mm ball bearings   We recommend using high quality G&G BB's starting at 0.20g. NIMH batteries are not compatible with this Airsoft Gun. We recommend LiPo Batteries from Delta Armory or BEARS-TEC. A battery is not included in the delivery. A charger is not included in the delivery.

Spare magazine for CM125 AEP Pistol 30rds

Dump Pouch