ICS MA-79 M4 Bipod Grip System

45 Degrees Mount Keymod

Der Snickers Creamy Peanut Butter ist die Vereinigung von zart und knackig. Zartes Karamell und cremige Erdnussbutter treffen auf knackige, geröstete Erdnüsse. Umhüllt wird das Ganze mit zarter Schokolade. Eine tolle Kombination gegen den kleinen Hunger. In einem Riegel befinden sich 2 kleine Portionen. Praktisch zum Teilen, Einteilen oder doppelt genießen. Zutaten Zutaten: Erdnüsse, Zucker, Glukosesirup, Magermilchpulver, Kakaobutter, Milchzucker, Invertzucker, Kakaomasse, Dextrose, Sonnenblumenöl, Süßmolkenpulver (aus Milch), Butterreinfett (aus Milch), Feuchthaltemittel (Glycerin, Sorbit), gehärtetes Sojafett, Palmfett, Salz, Emulgator (Sojalecithin), Antioxidationsmittel (Stark tocopherolhaltige Extrakte), Stärke, Vanilleextrakt. (Kann enthalten: Haselnuss, Ei).   Nährwerte Nährwert pro 100 Gramm: Energie:2169kJ/519kcal Fett:29,0g davon gesättigte Fettsäuren:9,1g Kohlenhydrate:51,0g davon Zucker:48,0g Eiweiß:10,g Salz:0,57g Allergikerhinweis Sojabohnen und daraus hergestellte Erzeugnisse Milch und daraus hergestellte Erzeugnisse (einschließlich Laktose) Erdnüsse und daraus hergestellte Erzeugnisse Spuren Weizen sowie daraus hergestellte Erzeugnisse Schalenfrüchte (Mandeln, div. Nüsse, Pistazien) sowie daraus hergestellte Erzeugnisse Hafer sowie daraus hergestellte Erzeugnisse Glutenhaltige Getreide sowie daraus hergestellte Erzeugnisse Gerste sowie daraus hergestellte Erzeugnisse Eier sowie daraus hergestellte Erzeugnisse Lagerungshinweise Kühl und trocken an einem dunklen Ort aufbewahren, nicht im Kühlschrank.

BEARS-TEC® ist unsere Premium Hausmarke und nur für die besten Produkte vorgesehen! Dieser Li-Po Akku verfügt über einen T-Plug Stecker und beinhaltet gleichzeitig ein Adapterkabel auf Mini-Tamiya. Er ist dreiteilig und durch die Verwendung der neusten Akku-Zellen superschlank. Mit den Abmessungen  117mm x 16mm x 6,5mm pro Zelle (ohne das Kabel) dürfte dieser Airsoft-Akku der schmalste Triple-Stick auf dem Markt sein! Der Akku hat 11,1V Spannung und eine Ladekapazität von 1450mAh. Die Entladerate liegt bei 30C UNBEDINGT beachten: Besonders bei LiPo Akkus ist es zwingend notwendig, nur geeignete LiPo Ladegeräte mit eingebautem Balancer zu werden. Der max. Ladestrom darf höchstens 1C (einfache Kapazität) betragen, d.h. bei einer 1100mAh Zelle max. 1100mA. Lithium Polymer Akkus sind elektrisch und thermisch empfindlich: Überladen, Tiefentladen, zu hohe Ströme, Betrieb bei zu hohen (größer 60 °C) oder zu niedrigen Temperaturen (kleiner 0 °C) und Lagern in entladenem Zustand schädigen oder zerstören die Zellen in den meisten Fällen. Hier sind nur die jeweiligen Ladegeräte freigegeben. Bitte beachten Sie auch in jedem Fall die dem Akku beiliegenden Warnhinweise. Nur verwenden bei Waffen, die auch als LiPo ready angegeben sind.  WICHTIGE SICHERHEITSINFORMATIONEN: 1. Niemals unbeaufsichtigt aufladen 2. Auf einen feuerfesten Untergrund stellen 3. darauf achten das sich die kabel nicht beim einlegen in die Waffe abisolieren! Lieferumfang: 1x BEARS-TEC® Airsoft LiPo Akku 11.1V 1450mAh, 30C dreiteilig - T-Plug 1x Adapterkabel von T-Plug auf Mini-Tamiya

The Delta Armory 3-9x50EG riflescope is designed for accurate shooting and is intended for airsoft guns. Instead of a traditional front sight and a gap, it has a reticle that increases aiming accuracy and is located in the focal plane. The 3-9x50EG riflescope with a 50mm objective diameter has a ZOOM zoom of 3x to 9x. It is resistant to moisture, dust, fogging and normal shocks. The scope is all metal and is made of anodized aluminum in a non-reflective matte black finish. It is mounted on a 22mm RIS rail.   Included are 22mm mounting rings and a CR2032 battery.

ETU NC! - Version!!! (Electronic Trigger Unit - No Compromise!) The NC! versions of our Delta Armory softair rifles are not only equipped with an ETU but also have a comprehensive tuning package. Details can be found below in the product description! The softair rifle from Delta Armory now with ETU (Electronic Trigger Unit) in the NC! edition, with quick spring change system in calibre 6 mm BB as S-AEG with improved internals, belongs to the ALPHA series. The ALPHA series is the aluminium alloy series and thus the Delta Armory Professional series. The "Fully upgraded - No compromises" ETU series is the ideal sporting equipment you need from the beginning of your airsoft adventure through the advanced level to the professional airsoft player. The Delta Armory ETU series was developed to save you an odyssey with problem weapons. It will be your faithful companion from the very beginning, if that's what you want. Delta has gone beyond the usual entry-level systems and has paid attention to the use of the best components in the development of the ETU series. The softair rifles are designed in such a way that you don't have to study a thick manual to get started. All you have to do is insert your charged LiPo battery into the gun, connect it and fill the magazine with reasonable BBs. You're ready to go with your reliable companion. For the internals, only robust and very high quality, mostly CNC-milled products were used. The CNC-milled 16:1 gears together with the neodymium magnet motor ensure top response and a high firing rate, guaranteeing stress-free action and fun on the playing field. It is not a trick but experience that Delta Armory uses 8mm bushings for extra durability. These are much more durable and resistant than the usual ball bearings. All highly stressed parts are made of steel or even stainless steel using the CNC process. Therefore, the cylinder, the steel teeth of the pistol and the springuide are made of these materials. Delta Armory uses proven systems for the cylinder head and delivers it CNC-milled from aluminium with a double O-ring seal. Our experience has shown that this type of sealing may not look as spectacular, but it still provides the best sealing of the system compared to other systems. The whole thing is further optimised by the CNC-milled nozzle with O-ring seal. Of course, the ETU series from Delta Armory no longer uses Mini-Tamiya plugs, but instead relies on the better T-Dean plugs. They offer better current flow and thus less resistance and more durability. Unfortunately, no programming is possible with the SEMI version of the ETU. Therefore, the functionality is limited to the better trigger behaviour, the protection against gearjams* and the battery monitoring. On the high-performance Aluminium alloy handguard and the high-performance Aluminium alloy body there is a Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids, whether telescopic sights or red dot sights, can be mounted. Delta Armory has installed a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are flip-up. The outer barrel has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. The fire selector lever is on one side and locks perfectly on the various settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically shaped. The sling swivel above the grip has a mount for risers on the left and right side. To access the adjustable hop-up in the case ejection window, pull the charging handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) locking catches that are switched in the same direction. Whether you pull left, right or both sides, the charging handle is easy to operate. The Delta Armory is supplied with a midcap magazine. The stock of the rifle offers space for an 11.1 volt Lipo Triple-Stick battery. The built-in gearbox from Delta Armory is a V2 metal gearbox with 8 mm bearings. With an adjustable rotary hop-up chamber, the range and accuracy of the assault rifle is remarkable. *An ETU, no matter which one, is the best protection against gearjams and unlike mosfets, the ETU offers 99.9% protection against a softairgun gearjam. Technical specifications (highlights are marked in bold) - CNC 16:1 gears - CNC Piston head - CNC Nozzle - CNC Stainless steel cylinder - CNC stainless steel spring guide - High Torque Motor with super strong Neodymium magnets - 6,03mm tuning barrel - SHS piston with full metal teeth - QRS spring quick change system gen.without disassembly of the rifle - QRS motor quick change - Rotery hop-up chamber - High quality 8 mm ball bearings To avoid feeding problems please do not use cheap BBs. We recommend to use high quality BB's from Delta Armory or G&G BB's from 0,25g. Due to the ETU, the gun is NOT compatible with NIMH batteries. We recommend LiPo batteries from Delta Armory or BEARS-TEC. A battery is not included in the scope of delivery. A charger is not included in the scope of delivery.

Rail set für G&G KeyMod HandguardLieferumfang: 2 RailsLänge: 75mm je Rail