Haribo Phantasia 175g Tüte

G&G CM16 SRL Polarstar F2 HPA - Version black Airsoft -F-

CNC Aluminum Advanced Trigger is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles. The Advanced Trigger has multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards. The Advanced Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box. The Advanced Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems. The main pivot pin of the trigger is made from Titanium for maximum strength and durability. The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum. The Aluminum and Titanium construction makes this trigger very light and durable. Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip. With the unique shapes, stylish design and colors, we will have an option to fit your style needs. ***For users convince the trigger spring is included.   Includes 1 x CNC Aluminum Advanced Trigger 1 x Setscrew 3 x Rubber Pad 1 x Titanium Pivot Pin 1 x Steel Trigger Spring   Specification Overall Length: 47.75mm Overall Width: 7mm Pivot Pin Diameter: 3mm Material: Titanium/Aluminum 6061   Features Machined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability Designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles Multiple adjustment points to control travel, over travel, and to prevent damage to electronic switches on controller boards Compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box Designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems Titanium Pivot Pin for maximum strength and durability Aluminum and Titanium construction, very light and durable Chamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip Unique shapes, stylish design and Colors   Usage Used for Ver. 2 gear box AEG/HPA (M4, M16,...)   Requires Wearing eye protection is recommended Use proper tools for disassembly and reassembly the gear box with great care due to spring tension Bearing lubricant oil/grease is recommended for smooth operation   Instruction Instruction Manuals are included TITAN is a registered trademark of GATE Menet, Wojtak sp. j. Tokyo Marui is a registered trademark of Tokyo Marui Co. Ltd.

CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series. The Hopup Chamber M4A unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber M4A unit is designed to accept 21.00mm to 21.25mm nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber M4A unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional) Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting. More than that, the Hopup Chamber M4A Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber. ***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately) ***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS! 1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit 2 x CNC Acrylic Side Cover 2 x CNC Brass 2.5mm Side Wing 1 x CNC Steel Pivot Pin 1 x CNC Aluminum Hopup Lever 1 x CNC Aluminum Soft Round Nub 1 x CNC Aluminum Soft Flat Nub (4mm) 1 x CNC Aluminum Hard Concave Nub (4mm) 3 x Steel Nub Spring 1 x CNC Steel Spring Guide 1 x Steel Upper Compression Spring 1 x Steel Center Compression Spring 1 x CNC Delrin Locking C-Clip 1 x CNC Brass Barrel Spacer 1 x Brass Barrel Spacer Holder Oring 1 x CNC Aluminum Rotary Dial Knob 1 x CNC Aluminum Inlet Adaptor (OD11mm) 1 x CNC Brass Inlet Spacer Overall Length: 51.65mm Overall Height: 37.75mm Inlet Adaptor Outer Diameter (to fit into Gear Box): 11mm Hub Outer Diameter (to fit into Outer Barrel): 12mm Hub Inner Diameter (to fit Nozzle): 8mm Feeder Outer Diameter (to fit magazine): 8.85mm Feeder Length (to fit magazine): 6mm Material: Aluminum 6061 Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability Performed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series Precision Rotary Dial Knob for fine hopup adjustments Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot Removable Steel Pivot Pin for ease of setup and maintenance Accepted 21.00mm to 21.25mm nozzle length Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use Wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately) Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting Equipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use Specially designed with a new BB Latching System to prevent BB dropping after removing the magazine The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber Compatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets The Dual UV LED Tracer Module to glow BB in the dark ready! Compatible with most Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series   Requires Wearing eye protection is recommended Use proper tools for disassembly and reassembly the gear box with great care due to spring tension Bearing lubricant oil/grease is recommended for smooth operation   Instruction Instruction Manuals are included Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd. G&G® is a registered trademark of G&G Amarment Taiwan Ltd. KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries. KWA® is a registered trademark of KWA Performance Industries, Inc.

6.03mm Prometheus EG Barrel for G&G ARP 9 + ARP 556 128mm

Systemartikel, kann nicht einzeln bestellt werden! Klassische Abzugseinheit mit Metallkontakten OHNE Mosfet oder Mikroschalterfunkton

Konfigurator Systemartikel! Dieser Artikel ist nicht einzeln bestellbar.