Air Nozzle for G2/G2H (Double O-rings) Series from G&G

BLS Airsoft Bio BB`s 0.28g (3500)

Magazin M4 Midcap in Black (130 BBs) - Delta Armory

The softair rifle from Specna Arms in caliber 6 mm BB with GATE X-ASR Mosfet and approx. 1.3 joules of energy. The weapon housing also known as body or lowerreceiver and upperreciever of this airsoft weapon is made of high performance polymer reinforced with fibers and is extremely stable. The handguard with keymod is made of high performance polymer. On the handguard and the body is a Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of aiming aids whether scope or red dot sight can be mounted. Specna Arms has built in a horizontally and vertically adjustable rear sight and a height-adjustable front sight. The rear sight and front sight are flip-up. The outer barrel has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for urban combat. The mounted muzzle flash hider is made of polymer. Specna Arms has also put a lot of thought into a realistic look, partly taking original markings from a Sharp AR-15 from the manufacturer Rock River Arms. The fire selector lever is located on both sides and locks perfectly on the different settings. Due to the slightly curved trigger guard, the trigger is easy to operate even with gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a mount for risers on the left and right sides. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the charging handle is easy to operate. The Specna Arms comes with a high-cap magazine. The magazine holds about 300 BB's and is loaded by turning up the cocking wheel. The stock of the rifle has room for an 11.1 volt Lipo Triple-Stick battery. The installed gearbox from Specna Arms is a V2 metal gearbox with 8mm bearings. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is remarkable. Muzzle velocity is max 374FPS with 0.20g BB's, which is equivalent to 1.3 joules of energy. We recommend to use high quality G&G BB's from 0,25g. A battery is not included in the delivery. A charger is not included in the scope of delivery.

M&M'S PEANUT! Erdnüsse (23%) in Milchschokolade (48%) mit Zuckerüberzug M&M'S® Peanut, auch bekannt als leckere Schokolinsen-Köstlichkeit mit einem knackigen Erdnusskern. Beste Qualität wird bei den Erdnüssen groß geschrieben und versprechen bunten Knabberspaß! Steigen Sie ein in die knackige Schoko-/ Erdnusswelt von M&M'S® Peanut. Zutaten Zucker, Erdnüsse, Kakaomasse, Magermilchpulver, Milchzucker und Milcheiweiß, Kakaobutter, Palmfett, Butterreinfett (aus Milch), Stärke, Glukosesirup, Sheafett, Emulgator (Sojalecithin), Stabilisator (Gummi arabicum), Farbstoffe (E100, E120, E133, E160a, E160e, E171), Dextrin, Überzugsmittel (Carnaubawachs), Kokosnussöl, Salz, Aromen. (Spuren: Haselnuss, Mandel) Nährwerte Nährwert pro 100 Gramm: Energie:2139kJ/511kcal Fett:25,3g davon gesättigte Fettsäuren:10,2g Kohlenhydrate:59,1g davon Zucker:53,6g Eiweiß:9,8g Salz:0,09g Allergikerhinweis • Milch (inkl. Lactose) und daraus hergestellte Erzeugnisse • Sojabohnen und daraus hergestellte Erzeugnisse • Erdnüsse und daraus hergestellte Erzeugnisse Spuren • Schalenfrüchte (d. h. Walnüsse, Cashewnüsse bzw. Kaschunüsse, Haselnüsse, Macadamianüsse bzw. Australnüsse bzw. Queenslandnüsse, Mandeln, Paranüsse, Pecannüsse, Pistazien) und daraus hergestellte Erzeugnisse Lagerungshinweise Kühl und trocken an einem dunklen Ort aufbewahren, nicht im Kühlschrank.

Maple Leaf Macaron HopUp Rubber für AEG 75 Degree - RosaDas MacaronHopUpRubber ist die Weiterentwicklung des Diamond HopUp Rubbersund ist aus einem etwas festerem Material hergestellt.- Durch die speziele Druckpunkt-Geometrie hat das HopUp eine verbesserte Leistung und steigert die Genauigkeit.- Die gerippte Außenfläche sorgt für eine bessere Luftabdichtung- Geeignet für die meisten Marui-kompatiblen AEG Hop-Kammern- Dieses HoUp Rubber ist für Softairs von 130 m/s bis 150 m/s gedacht

CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series. The Hopup Chamber M4A unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber M4A unit is designed to accept 21.00mm to 21.25mm nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber M4A unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional) Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting. More than that, the Hopup Chamber M4A Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber. ***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately) ***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS! 1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit 2 x CNC Acrylic Side Cover 2 x CNC Brass 2.5mm Side Wing 1 x CNC Steel Pivot Pin 1 x CNC Aluminum Hopup Lever 1 x CNC Aluminum Soft Round Nub 1 x CNC Aluminum Soft Flat Nub (4mm) 1 x CNC Aluminum Hard Concave Nub (4mm) 3 x Steel Nub Spring 1 x CNC Steel Spring Guide 1 x Steel Upper Compression Spring 1 x Steel Center Compression Spring 1 x CNC Delrin Locking C-Clip 1 x CNC Brass Barrel Spacer 1 x Brass Barrel Spacer Holder Oring 1 x CNC Aluminum Rotary Dial Knob 1 x CNC Aluminum Inlet Adaptor (OD11mm) 1 x CNC Brass Inlet Spacer Overall Length: 51.65mm Overall Height: 37.75mm Inlet Adaptor Outer Diameter (to fit into Gear Box): 11mm Hub Outer Diameter (to fit into Outer Barrel): 12mm Hub Inner Diameter (to fit Nozzle): 8mm Feeder Outer Diameter (to fit magazine): 8.85mm Feeder Length (to fit magazine): 6mm Material: Aluminum 6061 Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability Performed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series Precision Rotary Dial Knob for fine hopup adjustments Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot Removable Steel Pivot Pin for ease of setup and maintenance Accepted 21.00mm to 21.25mm nozzle length Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use Wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately) Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting Equipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use Specially designed with a new BB Latching System to prevent BB dropping after removing the magazine The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber Compatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets The Dual UV LED Tracer Module to glow BB in the dark ready! Compatible with most Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series   Requires Wearing eye protection is recommended Use proper tools for disassembly and reassembly the gear box with great care due to spring tension Bearing lubricant oil/grease is recommended for smooth operation   Instruction Instruction Manuals are included Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd. G&G® is a registered trademark of G&G Amarment Taiwan Ltd. KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries. KWA® is a registered trademark of KWA Performance Industries, Inc.