AB163 Foldable Grip Black - FMA

Snickers! Milchschokolade, gefüllt mit feiner Candy-Creme (16%), Karamell (27%) und gerösteten Erdnüssen (22%) Das unschlagbare Original: Unter der knackigen Schale aus Vollmilch stecken Erdnüsse von bester Qualität, die Snickers® den  unverwechselbaren Geschmack geben. Die leckere Candy-Creme und das zarte Karamell vollenden das Meisterwerk und machen Snickers® zu einem der beliebtesten Snacks der Welt.   Zutaten Zucker, Glukosesirup, Erdnüsse, Magermilchpulver, Kakaobutter, Kakaomasse, Milchzucker, Sonnenblumenöl, Butterreinfett (aus Milch), Süssmolkenpulver (aus Milch), Palmfett, Salz, Emulgator (Sojalecithin), Hühnerei-Trockeneiweiß, Kokosnussöl, Milcheiweißhydrolysat, natürlicher Vanilleextrakt Zusatzstoffe • Emulgator • Lecithine (E322) Nährwerte Nährwert pro 100 Gramm: Energie: 2026kJ/484kcal Fett: 22,9g davon gesättigte Fettsäuren: 8,4g Kohlenhydrate: 60,2g davon Zucker: 51,6g Eiweiß: 8,7g Salz: 0,63g Allergikerhinweis • Eier und Eierzeugnisse • Haselnuss und Haselnusserzeugnisse • Milchzucker (Laktose) • Milch und Milcherzeugnisse • Nüsse und Nusserzeugnisse • Erdnüsse und Erdnusserzeugnisse • Soja und Sojaerzeugnisse Spuren • Haselnuss und Haselnusserzeugnisse • Nüsse und Nusserzeugnisse Lagerungshinweise Kühl und trocken an einem dunklen Ort aufbewahren, nicht im Kühlschrank.

One-piece Li-Po battery. The battery is 7.4V 1300mAh. IMPORTANT note: Especially with LiPo batteries, it is imperative to use only suitable LiPo chargers with built-in balancers. The max. charging current must not exceed 1C (single capacity), i.e. for a 1100mAh cell max. 1100mA. Lithium polymer batteries are electrically and thermally sensitive: overcharging, deep discharging, excessive currents, operation at temperatures that are too high (above 60 °C) or too low (below 0 °C) and storage in a discharged state will damage or destroy the cells in most cases. Only the respective chargers are approved here. Please also observe the warnings enclosed with the battery in any case. Only use with weapons that are also specified as LiPo ready. Voltage: 7.4 Volt (2 cells) Capacity: 1'300 mAh / 25 C Charging current (max.): 1.3 A Discharge current (max.): 32.5 A Watt-hour: 9.6 Wh Dimensions: 95x17x18.5 mm

The Nimrod Tactical T100 Multi-Chemistry Dual Charger is a universal AC charger that can charge most types of batteries. The unit can handle 2 batteries simultaneously, has various safety monitors and 10 profile memory levels. Included in the delivery are 2 adapter cables. 1x XT60 to T-Plug and 1x XT60 to Mini Tamiya. Features: - LCD display - Automatic cell recognition - Integrated balancer - Integrated power supply unit - Quick charge and trickle charge - Automatic charge limit setting - Charge temperature sensor connection - Input voltage monitoring - Timed charge limit setting AC Input: 100-240 V~ / 50-60Hz 120W Output: (10V ~ 5.0A) x2 Max. Output Voltage: (17.4V ~) x2 Output power: max. 50 W x2    

The softair rifle from Delta Armory now with ETU (Electronic Trigger Unit), with spring quick change system in calibre 6 mm BB with 0.5 joules, FullAuto and 3-round burst and improved internals, belongs to the Charlie series (The Charlie series is the high performance polymer series) and is the Delta Armory entry level rifle series. The rifles from the "Fully upgraded - No compromise" ETU series are the ideal sporting rifles you need from the beginning of your airsoft adventure through the advanced level up to the professional airsoft player. The Delta Armory ETU series is designed to save you an odyssey with problem guns. It will be your faithful companion from the beginning if you want it to be. Delta has gone beyond the standard entry-level systems and has used the best components in the development of the ETU series. These softair rifles are designed so that you don't have to study a thick manual to get started. All you have to do is insert your charged LiPo battery into the gun, connect it and fill the magazine with decent BB's. You're ready to go with your reliable companion. For the internals, only robust and very high quality mostly CNC milled products were used. The CNC milled 16:1 gears together with the neodymium magnet motor provide a top response and a high rate of fire, this guarantees you stress-free action and fun on the field. It is not a trick but experience that Delta Armory works for the special durability with 8mm bushings. These are contrary to the usual ball bearings significantly more durable and resistant. All highly stressed parts were made of steel or even stainless steel in the CNC process. Therefore, the cylinder, the steel teeth of the pistol and the springuide are made of these materials. Delta Armory uses proven systems for the cylinder head and delivers it CNC machined from aluminum with a double O-ring seal. Our experience has shown that this type of sealing does not look so spectacular but still provides the best sealing of the system compared to other systems. The whole system is optimized by the CNC-milled Nozzle with O-ring seal. Of course, the ETU series from Delta Armory no longer has Mini-Tamiya connectors installed, but relies on the better T-Dean connectors. They offer better current flow and therefore less resistance and more durability. On the high performance polymer handguard and the high performance polymer body is a Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all kinds of aiming aids whether scope or red dot sight can be mounted. Delta Armory has built in a horizontally and vertically adjustable rear sight and a height-adjustable front sight from the factory. The rear sight and front sight are flip-up. The outer barrel has a 14 mm left-hand thread for mounting a dummy silencer or a tracer unit for house fighting. The fire selector lever is located on one side and locks perfectly on the various settings. The slightly curved trigger guard makes it easy to pull the trigger even when wearing gloves. The pistol grip is ergonomically designed. The sling swivel above the grip has a mount for risers on the left and right sides. To access the adjustable hop-up in the case ejection window, pull the Charging Handle to the rear. The T-shaped charging handle on this model has ambidextrous (ambi) detents that are synchronized. Whether you pull left, right or both sides, the charging handle is easy to operate. The Delta Armory comes with a midcap magazine. The stock of the rifle has room for an 7.4 volt Lipo double-stick battery. Delta Armory's installed gearbox is a V2 metal gearbox with 8mm bearings. With an adjustable hop-up chamber, the range and accuracy of the assault rifle is remarkable. Technical specifications (highlights are marked in bold) - CNC 16:1 gears - CNC Piston head - CNC Nozzle - CNC Stainless Steel Cylinder - CNC stainless steel spring guide - High Torque Motor with super strong Neodymium magnets - 6,03mm tuning barrel - SHS piston with full metal teeth - QRS spring quick change system gen.without disassembly of the rifle - QRS motor quick change - Rotery hop-up chamber - High quality 8mm ball bearings   We recommend using high quality G&G BB's starting at 0.20g. NIMH batteries are not compatible with this Airsoft Gun. We recommend LiPo Batteries from Delta Armory or BEARS-TEC. A battery is not included in the delivery. A charger is not included in the delivery.

The company Delta Armory is not yet well known in Europe. As an exclusive distributor for Germany, we bring you the brand closer. Delta Armory has taken it to heart and thought about how we get cheap but at the same time high-quality BBs on the market. Away from the statements like: "Platinum", "Gold", "Silver", "Premium", Delta Armory writes on your BBs "High Quality". And exactly that hits the nail on the head. High Quality BBs in caliber 6mm in the color white. Some may think "well great yet another manufacturer", but Delta Armory does it right "consistent quality", "polished several times", "strict controls", "grade-free surface", and exactly these quality tests guarantee you the best flight characteristics for your hobby. Here are a pair of specs: -Delta Armory High Quality BBs in 6mm caliber in white color are biodegradable and are suitable for all types of magazines and especially for precision barrels (from 6.03 mm inner diameter). -The BBs are supplied in a practical resealable bag. -The BBs have a guaranteed diameter of 5.95mm (+/- 0.01mm). -The bullets decompose after a certain time due to exposure to moisture and sunlight, so store in a dry and dark place. (ISO 14855-1) -Difference in weight between individual balls is not more than 0.01g. -Special coating that reduces friction. -You can use airsoft ammo for manual, electric and gas powered airsoft guns. -Delta Armory BBs are suitable for all types of magazines and especially for precision barrels (from 6.03 mm inner diameter). The BBs are supplied in a practical resealable bag.

Das Rotpunktvisier des Herstellers Delta Armory kann auf eine 22 mm RIS-Schiene montiert werden. Die Höhe des Rotpunktes bei montiertem Rotpunktvisier beträgt ca. 6 cm. Die Länge des Visiers beträgt 95 mm. Das Paket beinhaltet ein Rotpunktvisier, Montage auf RIS-Schienen 22mm, Gummikappen und eine CR2032 Batterie.