45 Degree Keymod Mount

Nimrod Bio Tracer Airsoft BB 2000rds 0.25g (2.000 pcs.) - green

Three accesssory Rails with the M-Lok system allows you to mount grips, sights, lights and all 21mm picatinny rail accessories to any Airsoft gun with the M-Lok system. Ideal for the EVO B.E.T and A1 Carbine versions. Each rail is 8cm long The rail is made of ABS and comes in sets of  3.

Built legion-strong and combat-ready, the Firefield Impact Mini Reflex Sight Kit packs big red-dot performance into a small, ruggedly reliable optic complete with an illuminated 5-MOA red-dot reticle featuring 5 brightness settings. Perfect for ultra-fast target acquisition in close quarters, this mission-driven shockproof sight boasts advanced scratch-resistant, anti-reflective AR-red coated glass, infinite eye relief with 50-yd parallax setting and a crystal clear field of view. IP55 weatherproof protection and a 6061-T6 aircraft-grade aluminum housing keep your sight protected, even in harsh environments. The Firefield Impact Mini Reflex Sight mounts easily on a Weaver and picatinny rails and runs up to 40 hrs. on a CR1632 battery. This reflex sight kit includes low profile, co-witness and 45° mounts, a cover, CR1632 battery and adjustment tools. Included in Package - Low profile weapon mount - Co-witness weapon mount - 45 degree mount - Cover - Tools - Battery Batteries Used - Type: CR1632 - Quantity: 1 Features - Rugged, mission-ready reflex sight - 5 MOA reticle - Illuminated reticle - 5 brightness settings - Digital switch - IP55 weatherproof and shockproof - Compact, lightweight design - Includes a 45° mount

Blaster Tracer Unit Black 11mmCW/14mm CCW - Acetech - Batterie bis zu 35000 Schuss - Blaster Tracer Modul - kann die Tracerfunktion bis zu 35rps aufrecht erhalten. - eingebaute Lithium-Batterie - USB-Ladefähig ("Micro USB Port", Kabel im Lieferumfang enthalten) - Funktioniert mit grün leuchtenden BB's. - Adapter für 14mm CCW auf 11mm CW beiliegend Ein Akku ist im Lieferumfang inbegriffen. Ein Ladegerät ist im Lieferumfang nicht inbegriffen.

3.FTS Magnifier

CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series. The Hopup Chamber M4A unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber M4A unit is designed to accept 21.00mm to 21.25mm nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber M4A unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional) Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting. More than that, the Hopup Chamber M4A Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber. ***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately) ***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS! 1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit 2 x CNC Acrylic Side Cover 2 x CNC Brass 2.5mm Side Wing 1 x CNC Steel Pivot Pin 1 x CNC Aluminum Hopup Lever 1 x CNC Aluminum Soft Round Nub 1 x CNC Aluminum Soft Flat Nub (4mm) 1 x CNC Aluminum Hard Concave Nub (4mm) 3 x Steel Nub Spring 1 x CNC Steel Spring Guide 1 x Steel Upper Compression Spring 1 x Steel Center Compression Spring 1 x CNC Delrin Locking C-Clip 1 x CNC Brass Barrel Spacer 1 x Brass Barrel Spacer Holder Oring 1 x CNC Aluminum Rotary Dial Knob 1 x CNC Aluminum Inlet Adaptor (OD11mm) 1 x CNC Brass Inlet Spacer Overall Length: 51.65mm Overall Height: 37.75mm Inlet Adaptor Outer Diameter (to fit into Gear Box): 11mm Hub Outer Diameter (to fit into Outer Barrel): 12mm Hub Inner Diameter (to fit Nozzle): 8mm Feeder Outer Diameter (to fit magazine): 8.85mm Feeder Length (to fit magazine): 6mm Material: Aluminum 6061 Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability Performed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series Precision Rotary Dial Knob for fine hopup adjustments Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot Removable Steel Pivot Pin for ease of setup and maintenance Accepted 21.00mm to 21.25mm nozzle length Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use Wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately) Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting Equipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use Specially designed with a new BB Latching System to prevent BB dropping after removing the magazine The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber Compatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets The Dual UV LED Tracer Module to glow BB in the dark ready! Compatible with most Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series   Requires Wearing eye protection is recommended Use proper tools for disassembly and reassembly the gear box with great care due to spring tension Bearing lubricant oil/grease is recommended for smooth operation   Instruction Instruction Manuals are included Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd. G&G® is a registered trademark of G&G Amarment Taiwan Ltd. KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries. KWA® is a registered trademark of KWA Performance Industries, Inc.