Filter
G&G Ifrit 25K Motor - Long Type orange (25000rpm)G&G Ifrit 25K Motor - Long Type orange (25000rpm)
G&G Ifrit 25K Motor - Long Type orange (25000rpm)
Ifrit 25K Motor - Long Type orange für alle G&G Airsofts (auch GSS) und kompatible Modelle (25000 RPM)

62,90 €*
Stück
Original Motor - Long Axis (Long Type) von G&G (18000 RPM) B-WAREOriginal Motor - Long Axis (Long Type) von G&G (18000 RPM) B-WARE
Original Motor - Long Axis (Long Type) von G&G (18000 RPM) B-WARE
Original Motor - Long Axis (Long Type) (18000 RPM) Der Standard Motor von G&G ist ein hochwertiger Qualitätsmotor und ideal geeignet um defekte oder leistungsschwache Motoren zu ersetzen. Wir empfehlen den Motor für die Verwendung mit Springs bis zu M120.   BWARE Ausgebaut aus Waffe

27,90 €*
Stück
NT Blackbird 30K CNC Motor Long - NimrodNT Blackbird 30K CNC Motor Long - Nimrod
NT Blackbird 30K CNC Motor Long - Nimrod
The Blackbird 30K series is built with solid materials and is suitable for nearly every setup. It is a very good allrounder that can be used to change the performance of your stock gun very quickly. Our magnets can withstand high temperatures up to 150°C The armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears. We do recommend using it in the following setups 18:1 / 16:1 / 13:1 Springs: M100 to M150

64,90 €*
Stück
Original Motor - short Axis (Short Type) von G&G (18000 RPM)Original Motor - short Axis (Short Type) von G&G (18000 RPM)
Original Motor - short Axis (Short Type) von G&G (18000 RPM)
NEUWARE OHNE UMVERPACKUNG   Original Motor - short Axis (Short Type) von G&G (18000 RPM) Der Standard Motor von G&G ist ein hochwertiger Qualitätsmotor und ideal geeignet um defekte oder leistungsschwache Motoren zu ersetzen. Wir empfehlen den Motor für die Verwendung mit Springs bis zu M120

27,90 €*
Stück
G&G Ifrit 25K Motor - Short Type orange (25000rpm)G&G Ifrit 25K Motor - Short Type orange (25000rpm)
G&G Ifrit 25K Motor - Short Type orange (25000rpm)
Ifrit 25K Motor -Short Type orange für alle G&G Airsofts und kompatible Modelle (25000 RPM)

54,90 €*
Stück
30K High Torque Motor Long - Krytac30K High Torque Motor Long - Krytac
30K High Torque Motor Long - Krytac
30K High Torque Motor Long - Krytac

104,90 €*
Stück
Ultimate Upgrade Motor -BOOST- 30K Custom - Short TypeUltimate Upgrade Motor -BOOST- 30K Custom - Short Type
Ultimate Upgrade Motor -BOOST- 30K Custom - Short Type
- CNC machined pinion steel gear- CNC machined stainless steel shaft > - Silicon steel rotor - Precision built motor housing - Heat resistant magnets (Neodym)- Enlarged motor-shaft ball-bearing stabilizers- High-grade silver plated wiring and larger carbon brushes

69,90 €*
Stück
Ultimate Motor Infinity CNC U-18000 - Long TypeUltimate Motor Infinity CNC U-18000 - Long Type
Ultimate Motor Infinity CNC U-18000 - Long Type
Ultimate Motor Infinity CNC U-18000 - Long Type

69,90 €*
Stück
Titan 35K Motor Long Type red (35000rpm) - G&GTitan 35K Motor Long Type red (35000rpm) - G&G
Titan 35K Motor Long Type red (35000rpm) - G&G
Titan 35K Motor Long Type red (35000rpm) - G&G

72,90 €*
Stück
Ultimate Upgrade Motor -BOOST- 40K Custom - Long TypeUltimate Upgrade Motor -BOOST- 40K Custom - Long Type
Ultimate Upgrade Motor -BOOST- 40K Custom - Long Type
- CNC machined pinion steel gear- CNC machined stainless steel shaft > - Silicon steel rotor - Precision built motor housing - Heat resistant magnets (Neodym)- Enlarged motor-shaft ball-bearing stabilizers- High-grade silver plated wiring and larger carbon brushes

69,90 €*
Stück
Trident Mk2 Defiance Motor Plate - KrytacTrident Mk2 Defiance Motor Plate - Krytac
Trident Mk2 Defiance Motor Plate - Krytac
Trident Mk2 Defiance Motor Plate - KrytacLieferumfang: Bodenplatte ohne Schrauben

10,90 €*
Stück
30000R Infinity Motor Short Axis - Action Army30000R Infinity Motor Short Axis - Action Army
30000R Infinity Motor Short Axis - Action Army
30000R Infinity Motor Short Axis

81,90 €*
Stück
NT Blackbird 45K CNC Motor Long - NimrodNT Blackbird 45K CNC Motor Long - Nimrod
NT Blackbird 45K CNC Motor Long - Nimrod
The Blackbird 45K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C The armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears. We do recommend using it in the following setups 32:1 / 18:1 Springs: M100 to M130

64,90 €*
Stück
NT Blackbird 30K CNC Motor Short - NimrodNT Blackbird 30K CNC Motor Short - Nimrod
NT Blackbird 30K CNC Motor Short - Nimrod
The Blackbird 30K series is built with solid materials and is suitable for nearly every setup. It is a very good allrounder that can be used to change the performance of your stock gun very quickly. Our magnets can withstand high temperatures up to 150°C The armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears. We do recommend using it in the following setups 18:1 / 16:1 / 13:1 Springs: M100 to M150

64,90 €*
Stück
INFINITY U-40000 Motor medium axelINFINITY U-40000 Motor medium axel
INFINITY U-40000 Motor medium axel
High-Speed / Low Torque-Motor (HS / LT) mit mittlerer Achse, geeignet für Federn zwischen M100 und M110, in Verbindung mit entsprechenden Getrieben. Die neuen High-Performance-Motoren aus der ULTIMATE ® Upgrade-Serie besitzen handgewickelte Spulen, die optimale Leistung sicher stellen. Die Motoren bauen auf  neuester patentierter Technologie auf und erfordern weniger Wartung, haben eine längere Lebensdauer und nicht zuletzt eine höhere Leistung - Fähigkeiten die für den Profi-Gamer und die Airsoft-Enthusiasten von enormer bedeutung sind.. Features:- Anti-Öl-absorbierende Funktion- Motor-Stabilisator- Perfektes Hitzemanagement- Polymer-Rückseite- Unübertroffene Haltbarkeit- Interne Kugellager Unterstützung.- Super-Magnete für kontinuierliche und perfekte Leistung.- Übergrße Kohlebürsten für lange Lebensdauer.- Stahl Ritzel auf 50-55 HRC gehärtet  Mehrere Stress-Tests zeigen, dass INFINITY Hochleistungsmotoren ihresgleichen suchen.

69,90 €*
Stück
Tipp
Neu
Brushless Motor Black Ultra High Speed 52k RPM Short | Warhead IndustriesBrushless Motor Black Ultra High Speed 52k RPM Short | Warhead Industries
Brushless Motor Black Ultra High Speed 52k RPM Short | Warhead Industries
Warhead Industries bürstenloser Motor für Airsoft Elektrogewehre. Erhöhte Leistung und Zuverlässigkeit im Vergleich zu Standard-AEG-Motoren mit Bürsten. Eigenschaften: Abmessungen (lange Ausführung): 88x30x25 Millimeter Abmessung (kurzer Typ): 69x30x25 Millimeter Gewicht: 119 Gramm D-Typ Ritzelgetriebe Standard: 30.000 Umdrehungen pro Minute mit einer 11,1-V-Batterie Hohe Geschwindigkeit: 36.000 Umdrehungen pro Minute mit 11,1-V-Batterie Ultra High-Speed: 52.000 Umdrehungen pro Minute mit 11,1-V-Akku Interner ESC mit Überstrom- und Unterspannungsabschaltung Geringere Hitzeentwicklung als bei herkömmlichen Bürstenmotoren Material: Aluminium 7075 Gehäuse Kupfer-Wicklungen Stahl-Ritzel Haftungsausschluss: Die angegebene Drehzahl ist ein ungefährer Durchschnittswert, die Leistung kann variieren. Nur Lipo/Li-Ion-Akkus 14.8v Batterien funktionieren nicht Bei Verwendung einer ECU (GATE Titan, Perun, Jefftron, etc.) darf keine Feuerratensteuerung verwendet werden.

169,90 €*
Stück
Ultimate Motor Infinity CNC U-30000 - Short TypeUltimate Motor Infinity CNC U-30000 - Short Type
Ultimate Motor Infinity CNC U-30000 - Short Type
This is a short shaft version, rated to run at 30000 rpm (picture shows long type)The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the discerning Airsoft player to find the optimal solution for any particular upgrade.For in-depth information on the INFINITY CNC series, see datasheet here.   Features: CNC machined aluminum front and back coversCNC machined pinion steel gearCNC machined stainless steel shaftSilicon steel rotorPrecision built motor housingHeat resistant rare-earth magnetsEnlarged motor-shaft ball-bearing stabilizersHigh-grade silver plated wiring and larger carbon brushes for improved electrical conductivity   The INFINITY CNC motors are designed, with the best features found in Airsoft motors currently on the marked. The result is a motor which is at the pinnacle of what is achievable today.The INIFINITY CNC is the best of the best.

69,90 €*
Stück
Ultimate Motor Infinity CNC U-40000 - Long TypeUltimate Motor Infinity CNC U-40000 - Long Type
Ultimate Motor Infinity CNC U-40000 - Long Type
This is a long axle version, rated to run at 40000 rpm.The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the discerning Airsoft player to find the optimal solution for any particular upgrade.For in-depth information on the INFINITY CNC series, see datasheet here.   Features: CNC machined aluminum front and back coversCNC machined pinion steel gearCNC machined stainless steel shaftSilicon steel rotorPrecision built motor housingHeat resistant rare-earth magnetsEnlarged motor-shaft ball-bearing stabilizersHigh-grade silver plated wiring and larger carbon brushes for improved electrical conductivity   The INFINITY CNC motors are designed, with the best features found in Airsoft motors currently on the marked. The result is a motor which is at the pinnacle of what is achievable today.The INIFINITY CNC is the best of the best.

69,90 €*
Stück
Ultimate Motor Infinity CNC U-45000 - Long TypeUltimate Motor Infinity CNC U-45000 - Long Type
Ultimate Motor Infinity CNC U-45000 - Long Type
This is a long axle version, rated to run at 45000 rpm.The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the discerning Airsoft player to find the optimal solution for any particular upgrade.For in-depth information on the INFINITY CNC series, see datasheet here.   Features: CNC machined aluminum front and back coversCNC machined pinion steel gearCNC machined stainless steel shaftSilicon steel rotorPrecision built motor housingHeat resistant rare-earth magnetsEnlarged motor-shaft ball-bearing stabilizersHigh-grade silver plated wiring and larger carbon brushes for improved electrical conductivity   The INFINITY CNC motors are designed, with the best features found in Airsoft motors currently on the marked. The result is a motor which is at the pinnacle of what is achievable today.The INIFINITY CNC is the best of the best.

69,90 €*
Stück
NT Blackbird 20K CNC Motor Long - NimrodNT Blackbird 20K CNC Motor Long - Nimrod
NT Blackbird 20K CNC Motor Long - Nimrod
The Blackbird 20K series is built with solid materials and is suitable for nearly every setup. Due to the high TPA (Turns Per Armature) it can easily pull up all kinds of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C The armature is equipped with a cooling system as well as 0.8mm wires. This motor is perfect for high-speed gears or DSG builts. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears. We do recommend using it in the following setups 16:1 /13:1/ 12:1 / DSG Springs: M120+

64,90 €*
Stück
NT Blackbird 45K CNC Motor Short - NimrodNT Blackbird 45K CNC Motor Short - Nimrod
NT Blackbird 45K CNC Motor Short - Nimrod
The Blackbird 45K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C The armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears. We do recommend using it in the following setups 32:1 / 18:1 Springs: M100 to M130

64,90 €*
Stück
Ultimate Motor Infinity CNC U-35000 - Short TypeUltimate Motor Infinity CNC U-35000 - Short Type
Ultimate Motor Infinity CNC U-35000 - Short Type
This is a short shaft version, rated to run at 35000 rpm (picture shows long type)The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the discerning Airsoft player to find the optimal solution for any particular upgrade.For in-depth information on the INFINITY CNC series, see datasheet here.   Features: CNC machined aluminum front and back coversCNC machined pinion steel gearCNC machined stainless steel shaftSilicon steel rotorPrecision built motor housingHeat resistant rare-earth magnetsEnlarged motor-shaft ball-bearing stabilizersHigh-grade silver plated wiring and larger carbon brushes for improved electrical conductivity   The INFINITY CNC motors are designed, with the best features found in Airsoft motors currently on the marked. The result is a motor which is at the pinnacle of what is achievable today.The INIFINITY CNC is the best of the best.

69,90 €*
Stück
Ultimate Motor Infinity CNC U-30000 - Long TypeUltimate Motor Infinity CNC U-30000 - Long Type
Ultimate Motor Infinity CNC U-30000 - Long Type
This is a long axle version, rated to run at 30000 rpm.The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the discerning Airsoft player to find the optimal solution for any particular upgrade.For in-depth information on the INFINITY CNC series, see datasheet here.   Features: CNC machined aluminum front and back coversCNC machined pinion steel gearCNC machined stainless steel shaftSilicon steel rotorPrecision built motor housingHeat resistant rare-earth magnetsEnlarged motor-shaft ball-bearing stabilizersHigh-grade silver plated wiring and larger carbon brushes for improved electrical conductivity   The INFINITY CNC motors are designed, with the best features found in Airsoft motors currently on the marked. The result is a motor which is at the pinnacle of what is achievable today.The INIFINITY CNC is the best of the best.

69,90 €*
Stück
Tipp
Neu
Brushless Motor RONIN 31k RPM Short | Warhead IndustriesBrushless Motor RONIN 31k RPM Short | Warhead Industries
Brushless Motor RONIN 31k RPM Short | Warhead Industries
Warhead Industries bürstenloser Motor für Airsoft Elektrogewehre. Erhöhte Leistung und Zuverlässigkeit im Vergleich zu Standard-AEG-Motoren mit Bürsten. Der Warhead Ronin Motor ist die Spitze der Qualität in Bezug auf das, was wir mit einem bürstenlosen Motor dieser Größe erreichen können. Er stellt eine Reihe von Upgrades gegenüber dem Standard-CNC-Blackmotor dar und verfügt über die besten Komponenten, die wir im Slot produzieren können. Spezifikation: Der beste in Slot verfügbare Motor von Warhead. Hochwertiges 7075 Aluminium Gehäuse. Total Custom In-Runner Design mit maximaler Leistung und Drehmoment. Hoch temperaturbeständige Qualitäts-Kupferwicklungen. Magnete mit höchster Stärke. Leichtere Rotoreinheit. Titanium Welle. Individuell von Hand gewickelt. Verdrahtete Konnektoren für einfache Montage. Interner ESC mit Überstrom- und Unterspannungsabschaltung zum Schutz von Motor und Akku. Hochpräzise CNC-Konstruktion. Hochwertiges, abnehmbares D-Cut Ritzel für einfaches Auswechseln.   RPM Informationen: 31.000 RPM bei 11,1V Bürstenlose Motoren bieten zahlreiche weitere Vorteile, darunter; Höheres Verhältnis von Drehmoment zu Gewicht Höheres Drehmoment pro Watt Leistungsaufnahme (erhöhter Wirkungsgrad) Höhere Zuverlässigkeit und geringere Wartungsanforderungen Geringere Betriebs- und mechanische Geräusche Längere Lebensdauer (keine Erosion von Bürsten und Kommutatoren) Keine ionisierenden Funken vom Kommutator (ESD) Nahezu vollständige Beseitigung elektromagnetischer Störungen (EMI) Einfacher Einbau ohne Änderung oder zusätzliche Verdrahtung erforderlich

229,90 €*
Stück
Ultimate Upgrade Motor -BOOST- 40K Custom - Short TypeUltimate Upgrade Motor -BOOST- 40K Custom - Short Type
Ultimate Upgrade Motor -BOOST- 40K Custom - Short Type
- CNC machined pinion steel gear- CNC machined stainless steel shaft > - Silicon steel rotor - Precision built motor housing - Heat resistant magnets (Neodym)- Enlarged motor-shaft ball-bearing stabilizers- High-grade silver plated wiring and larger carbon brushes

69,90 €*
Stück
15.99 %
Tipp
20K Performance Motor Long - Krytac20K Performance Motor Long - Krytac
20K Performance Motor Long - Krytac
NEUWARE OHNE UMVERPACKUNG 20K Performance Motor Long - Krytac

49,90 €* 59,40 €*
Stück
NT Blackbird 39K CNC Motor Short - NimrodNT Blackbird 39K CNC Motor Short - Nimrod
NT Blackbird 39K CNC Motor Short - Nimrod
The Blackbird 39K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C The armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears. We do recommend using it in the following setups 32:1 / 18:1 / 16:1 Springs: M100 to M140

64,90 €*
Stück
45000R Infinity Motor Short Axis - Action Army45000R Infinity Motor Short Axis - Action Army
45000R Infinity Motor Short Axis - Action Army
45000R Infinity Motor Short Axis

81,90 €*
Stück
Ultimate Motor Infinity CNC U-35000 - Medium TypeUltimate Motor Infinity CNC U-35000 - Medium Type
Ultimate Motor Infinity CNC U-35000 - Medium Type
This is a medium axle version, rated to run at 35000 rpm (picture shows long type)The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the discerning Airsoft player to find the optimal solution for any particular upgrade.For in-depth information on the INFINITY CNC series, see datasheet here.   Features: CNC machined aluminum front and back coversCNC machined pinion steel gearCNC machined stainless steel shaftSilicon steel rotorPrecision built motor housingHeat resistant rare-earth magnetsEnlarged motor-shaft ball-bearing stabilizersHigh-grade silver plated wiring and larger carbon brushes for improved electrical conductivity   The INFINITY CNC motors are designed, with the best features found in Airsoft motors currently on the marked. The result is a motor which is at the pinnacle of what is achievable today.The INIFINITY CNC is the best of the best.

69,90 €*
Stück
Tipp
Neu
Brushless Motor RONIN 45k RPM Short | Warhead IndustriesBrushless Motor RONIN 45k RPM Short | Warhead Industries
Brushless Motor RONIN 45k RPM Short | Warhead Industries
Warhead Industries bürstenloser Motor für Airsoft Elektrogewehre. Erhöhte Leistung und Zuverlässigkeit im Vergleich zu Standard-AEG-Motoren mit Bürsten. Der Warhead Ronin Motor ist die Spitze der Qualität in Bezug auf das, was wir mit einem bürstenlosen Motor dieser Größe erreichen können. Er stellt eine Reihe von Upgrades gegenüber dem Standard-CNC-Blackmotor dar und verfügt über die besten Komponenten, die wir im Slot produzieren können. Spezifikation: Der beste in Slot verfügbare Motor von Warhead. Hochwertiges 7075 Aluminium Gehäuse. Total Custom In-Runner Design mit maximaler Leistung und Drehmoment. Hoch temperaturbeständige Qualitäts-Kupferwicklungen. Magnete mit höchster Stärke. Leichtere Rotoreinheit. Titanium Welle. Individuell von Hand gewickelt. Verdrahtete Konnektoren für einfache Montage. Interner ESC mit Überstrom- und Unterspannungsabschaltung zum Schutz von Motor und Akku. Hochpräzise CNC-Konstruktion. Hochwertiges, abnehmbares D-Cut Ritzel für einfaches Auswechseln.   RPM Informationen: 45.000 RPM bei 11,1V Bürstenlose Motoren bieten zahlreiche weitere Vorteile, darunter; Höheres Verhältnis von Drehmoment zu Gewicht Höheres Drehmoment pro Watt Leistungsaufnahme (erhöhter Wirkungsgrad) Höhere Zuverlässigkeit und geringere Wartungsanforderungen Geringere Betriebs- und mechanische Geräusche Längere Lebensdauer (keine Erosion von Bürsten und Kommutatoren) Keine ionisierenden Funken vom Kommutator (ESD) Nahezu vollständige Beseitigung elektromagnetischer Störungen (EMI) Einfacher Einbau ohne Änderung oder zusätzliche Verdrahtung erforderlich

229,90 €*
Stück
M120 High Speed Motor Long TypeM120 High Speed Motor Long Type
M120 High Speed Motor Long Type
M120 High Speed Motor Long Type

32,90 €*
45000R Infinity Motor Long Axis - Action Army45000R Infinity Motor Long Axis - Action Army
45000R Infinity Motor Long Axis - Action Army
45000R Infinity Motor Long Axis

81,90 €*
Stück
G&G Talaria 40K Motor - Short Type blue (40000rpm)G&G Talaria 40K Motor - Short Type blue (40000rpm)
G&G Talaria 40K Motor - Short Type blue (40000rpm)
G&G Talaria 40K Motor - Short Type blue (40000rpm)

69,90 €*
Stück
Tipp
Neu
Brushless Motor RONIN 31k RPM Long | Warhead IndustriesBrushless Motor RONIN 31k RPM Long | Warhead Industries
Brushless Motor RONIN 31k RPM Long | Warhead Industries
Warhead Industries bürstenloser Motor für Airsoft Elektrogewehre. Erhöhte Leistung und Zuverlässigkeit im Vergleich zu Standard-AEG-Motoren mit Bürsten. Der Warhead Ronin Motor ist die Spitze der Qualität in Bezug auf das, was wir mit einem bürstenlosen Motor dieser Größe erreichen können. Er stellt eine Reihe von Upgrades gegenüber dem Standard-CNC-Blackmotor dar und verfügt über die besten Komponenten, die wir im Slot produzieren können. Spezifikation: Der beste in Slot verfügbare Motor von Warhead. Hochwertiges 7075 Aluminium Gehäuse. Total Custom In-Runner Design mit maximaler Leistung und Drehmoment. Hoch temperaturbeständige Qualitäts-Kupferwicklungen. Magnete mit höchster Stärke. Leichtere Rotoreinheit. Titanium Welle. Individuell von Hand gewickelt. Verdrahtete Konnektoren für einfache Montage. Interner ESC mit Überstrom- und Unterspannungsabschaltung zum Schutz von Motor und Akku. Hochpräzise CNC-Konstruktion. Hochwertiges, abnehmbares D-Cut Ritzel für einfaches Auswechseln.   RPM Informationen: 31.000 RPM bei 11,1V Bürstenlose Motoren bieten zahlreiche weitere Vorteile, darunter; Höheres Verhältnis von Drehmoment zu Gewicht Höheres Drehmoment pro Watt Leistungsaufnahme (erhöhter Wirkungsgrad) Höhere Zuverlässigkeit und geringere Wartungsanforderungen Geringere Betriebs- und mechanische Geräusche Längere Lebensdauer (keine Erosion von Bürsten und Kommutatoren) Keine ionisierenden Funken vom Kommutator (ESD) Nahezu vollständige Beseitigung elektromagnetischer Störungen (EMI) Einfacher Einbau ohne Änderung oder zusätzliche Verdrahtung erforderlich

229,90 €*
Stück
Ultra Torque Motor Short TypeUltra Torque Motor Short Type
Ultra Torque Motor Short Type
Ultra Torque Motor Short Type

39,90 €*
Stück
rum-static.pingdom.net/pa-65d5f49168cac40012000789.js